ignition switch

So my 2004 XLT Explorer just recently started misbehaving. 3 times in the last week, the engine simply quite while driving at low speed (25-30mph), but never at higher speeds. Engine would restart immediately, no problem. No other issues or symptoms were observed...until yesterday. Now, while...

Hi folks, The 'ignition switch' or 'ignition lock/coil', not sure the proper name for it, but the thing where you put the key in to start the car lol, has been jamming/sticking for awhile, until it finally got the best of me, and stopped turning altogether with the key in. I had just drove back...

I own a 2010 Ford Explorer XLT. The ignition switch fuse (#8) blows and we replace and try to crank and the fuse blows again. We replace the fuse and turn the key and everything works but when we try to crank it the fuse blows. I tried once in the morning and once in the evening putting the fuse...

Please I need wiring schematic for circuit that cover ignition switch,starter relay and neutral switch to try to resolve a no crank problem! Ford Explorer 2009 4.0 lt

Hello, Stopped by in my search for answers. Thank you. I own a 1998 Explorer Eddie B. 2wd with 302 V8, Automatic. Reached my destination, turned off my ignition key. Engine stopped but warning lights remained on with key out. I re-inserted key turned on then off, no change. Attempted to...

Hi guys, I'm newly registered but have been coming here for a while now. So a little while ago my shift lever broke off in my hand. I've already read about that here and see its happened to a few others. I've already ordered the part and seem to be doing just fine manually pulling and...

I was having some electrical issues with Truck just cutting out going down the road, thought it might be ignition key switch, as if I jiggled the switch everything would come back on. After replacing switch, noticed that everything went dead when key returned to "on" position, turned key...

2008 Sport Trac The ignition switch was so easy to get out I tried just squirting some TV tuner cleaner in the hole and worked the switch while I moved the plunger in the bottom up & down. Blew it out, put it back in & it works fine. Too young to be worn out. Lights work right now. Next...

Hi everyone, I drive a 1993 Ford Explorer XLT. My ignition stopped accepting the ignition key a few months back - instead it could be started by simply turning the wings on the ignition cylinder without a key in the ignition. A week ago, my ignition cylinder locked up, preventing me...

I have a 97 Explorer that developed a problem the last few days. When I turn the key backwards I have power and all lights and gauges work. When I turn key forward, as soon as the "key lock" button pops out I lose all power. Could this be as simple as changing the ignition switch or is it gonna...