interior lighting

Hello all! My 04 explorer has been having a strange issue that, thus far, I have heard of no one else having anywhere, from this forum to other websites. My interior lights are no longer turning on when any door is opened or when the light dial is turned all the way up. All interior lights still...

Just purchased my first Explorer and already need some help! I cannot get the interior lights to come on when I open the doors or use the key fob, but I can manually turn them on so I know they work. Help?

I drive an 02 mountaineer, and amoung other cars my dad has a 2013 limited explorer. One thing he and I both love about the 2013 in the multicolor ambient lighting inside. I'm looking to add something similar in my 2002, I found a 7 color kit on Amazon pretty cheap, and was thinking about how...

I've seen many threads about door ajar light staying on and interior lights staying on, but my interior lights stay on even after the door ajar light turns off, after vehicle is started and after vehicle is locked. No matter what the circumstances, these lights don't go off without pulling the...

hey guys still new so i just figured out the pictures, just changed my map light and dome lights over to LEDs. just wanted to show you the finished project. was not to tricky to instal, just had to get the LED polatity right. the map light was a bit tricky to change as well. but here is the...

no cluster lighting and ac panel minus the warning lights...dimmer works...radio lights work...any suggestions? ive checked all fuses and replaced bulbs in cluster

Hi, Im having a issue where my interior shifter column lights are not working. My All my other interior lights are working properly, dash,overhead, map, radio ect. Its not a fuse under the hood or dash. The only thing i have been able to gather from some research is that the bulb is not...

I have a '91 XLT and I bought a bunch of 194 White LED's to replace the old green behind the gauges. How do I change the color? I have heard that I will need to peel off a green film on the back side of the panel. I have not gotten this far before so I need some pointers! Thanks!