sohc

Will be replacing the water pump on my 2000 Eddie Bauer with a 4.0 SOHC (Towing package). I've read that possibly the radiator may need to come out as to provide the necessary clarence to get the water pump out. Is this the case? what setup / packages / trim requires that extra step of pulling...

Does anybody know what this is? Found in the bottom of my transmission pan. It's been slipping pretty bad lately so I figured I would drop the pan and check for metal shavings and replace the filter and fluid. This is what I found. Also, is that considered a lot of metal shavings? Trying to...

MY beloved 2000 Limited V8 AWD Explorer took a hit. A forklift driver hit me in the Walmart parking lot and did enough damage to prevent me from taking a trip I've been planning for almost a year. I'm looking at a few different options. I can either spend a $5-10k and get something as nice as...

Just another job done today that again improves the '97. I have been listening to the cheap muffler slowly get worse since I got the truck in Feb. So I ordered a Walker sound fx muffler (18564), as I wasn't going all in on a performance exhaust, yet. With a handful of couplers and clamps I was...

I’m not sure what to do with my Explorer because of the timing chain rattle at startup. It’s an 07 4.0 advance trac, I just passed 160,000 miles and the start up rattle is progressively getting worse. It takes longer to go away especially on a cold day. The rest of the engine seems to be in good...

Hi all. I rather stupidly trusted a UK member who begged me to order all of the OE cam guide parts necessary to rebuild his 2000 4.0 Sohc explorer since most of it is obsolete now. I work for a Ford dealer, so I get a decent discount. Usually our parts dept has a strict "pay up front" policy...

Hey! Wondering it anybody knows of a good shop that will replace the timing cassettes on a 4.0 sohc in the Northwest; Washington, Oregon, Montana area? Mine is due for it soon and I just got done swapping in a rebuilt 5r55s ( yes i know, i should have pulled the motor too and just done it. Not...

Thanks for welcoming me to the group! This site has been very helpful to me over the years! I currently have a few questions I need some answers for.. First off I’m needing torque specifications on everything I’m listing below and any tips to go along with it will be greatly appreciated! Thanks...

I recently pulled my 4.0 motor and completely redid all of the chains and guides. I even put in a new water pump and oil pump. Finally got it all together and back in the truck. Everything seems great, except I am now having an oil pressure issue…. Now I understand the gauge is largely...

Issue is with a RHD Australian 12/2000 Ford Explorer XLT 4.0L SOHC On a really hot day (over 40C) truck goes into Limp Home Mode (LHM) and will not drive faster than 15Kph. It is OK on other days! When it is running normally it drives and sounds fantastic having installed new timing chains...

1st off, I apologize if this is posted previous. I am losing my vision and have hard times at times trying to read. So I have a 95 limited 4.0 PUSHROD. For almost the last year it has pretty much run like crap. I have changed many things and with vision loss also comes the frustration of not...

I just purchased a 98 explorer xlt sans engine, Stock it had the 4.0 sohc. I have a 98 xl with 4.0 ohv. My ohv is still running strong but the NY salt ate her body all to hell. The sohc is from South Carolina and is rust free. I want to put my ohv in it. Here is my conundrum, when it comes...

ive always loved the explorer sport, not so much the 4door model (dont want to deal with all that extra weight + fuel usage lol) i used to have a 2001 explorer sport SOHC, automatic RWD and it had 3.73 final that i swapped to 4.10 with a locker, had some all terrain tires on it and put a bit of...

Tell me what you think... I know I didn't clean it up lol.

Alright so all of the sudden my 00 Explorer (4.0 SOHC) has been running like garbage. It started when one of my cats got plugged (it sure shined a nice cherry red). Since then, I have replaced plugs, plug wires, and coil. They didn't help so I replaced the Crank position sensor now too. The...

Hey! I've been wondering if deleting the resonator on the V6 will make a big difference in sound, of course it won't have the big, mean sound of a V8, but I'd like my truck to be a bit louder than it is currently. What all would removing the resonator entail? I'd like to keep everything in front...

Howdy, so I've become relatively well versed with the 4.0 SOHC, I ripped one out of my brother's sport trac (2001) and I put it in my sport trac (also 2001). Mine had the very very common timing chain issue where they simply get loose and also my transmission was barely staying into gear on the...

I have a 99 Explorer SOHC 4.0L and I just did the unbelievably fun job of replacing head gaskets, timing cassettes, and lining up torque converter to flex plate. And now it has come time to put back together someone else's dismantling job mind you of the heater and cooling lines, so long story...

Hi there guys really just honestly seeing if its worth it to swap the sohc engine into my 2003 explorer with the ohv engine and what would be needed for it. Just looking for some insite i do have some experience with them and if possible il do it in the mear future! Lemme know what you guys...

All right, so coming home on the highway today I noticed something new. (I may have heard it on the way there too, I don't remember). Anyway, I've gotten used to the death rattle at around 1k, but now, when my car is at 3k (I don't want to risk anything higher) it has begun to rattle much...

Been trying to get to the bottom of a bank 1 misfire. Actual codes are for cylinders 1, 2, 3, and random misfire. All happening at different times. Car seems to run fine until 45-50 mph and trying to accelerate, maybe somewhat of a lumpy idle, and/or odd lumpy acceleration. Doesn't feel as...

Hey everyone I have a 1999 sport 4.0 SOHC with 140k. I picked it up in decent shape and fixed up just about everything and drove her another 1,000 miles or more to make sure it was tip top. New BFG AT KO2s, new recliner, sear track, wiper motor, trim bits, tstat, fluids etc I decided to replace...

just finished a engine swap on my explorer all in all back together starter will not turn over I have voltage to it and it will turn over when I jump the solenoid the key will not turn it over did I trip out the theft system it is the only thing I can think of if I did any way to...

Okay, so this is a simple question, since my explorer is a 98 the plastic is obviously kinda old. However, the vents are hard to mess with because the close/open knobs like to stick, and moving it up/down and left/right is also hard, cause the plastic just wants to stick together so I feel like...

My 2000 Ford explorer. Recently had a setback after 275,000 miles the timing chains finally went out instead of scrapping the vehicle I decided new engine so I need you guys input on what all I should do I am replacing it with the stock 4.0 sohc. any problems you may have encountered