the | Page 4 | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

the

  1. Tighten the set screws with an Allen wrench.

    Tighten the set screws with an Allen wrench.

  2. The lock is installed!

    The lock is installed!

  3. The latch is installed.

    The latch is installed.

  4. The latch has two slots.

    The latch has two slots.

  5. The box.

    The box.

  6. Mark the upper hole.

    Mark the upper hole.

  7. Double check the alignment of the hole.

    Double check the alignment of the hole.

    Don't drill a 1/4" hole until you check the alignment first.
  8. Connect the strike plate.

    Connect the strike plate.

  9. Chisel the door for the latch.

    Chisel the door for the latch.

  10. Angle the bar this way for right hand operation.

    Angle the bar this way for right hand operation.

  11. Lift the clip, then pull on the shock.

    Lift the clip, then pull on the shock.

    Lift support shock removal.
  12. Front of the head.

    Front of the head.

    This is a lift support head.
  13. Back of the head.

    Back of the head.

    This is a lift support head.
  14. Always support the opposite shock with a Vice Grip.

    Always support the opposite shock with a Vice Grip.

    Always support the opposite shock with a Vice Grip when replacing lift support shocks.
  15. Tighten the new stabilizer link.

    Tighten the new stabilizer link.

  16. The stabilizer link is installed.

    The stabilizer link is installed.

  17. Lubricate the seal.

    Lubricate the seal.

  18. Fill the filter.

    Fill the filter.

  19. Two Torx head screws on the side.

    Two Torx head screws on the side.

  20. The side of the face plate is aligned with a tab.

    The side of the face plate is aligned with a tab.

  21. Two screws on the back.

    Two screws on the back.

  22. The paper on the back of the face plate is peeled off.

    The paper on the back of the face plate is peeled off.

  23. The panel is installed.

    The panel is installed.

  24. The old computer board.

    The old computer board.

  25. The new computer board.

    The new computer board.

Back
Top