valve body

Cleaning out the garage and found a 5R55E valve body and solenoid pack from my old 2007 Ford Explorer 4.0 V6. Working condition AFAIK. Free to a good home, as I no longer have my Explorer. Pick up locally (Indianapolis, IN area), or you pay to have shipped to you.

I've searched Ranger station, FTE, and this sight but can't find d a straight answer as to a possible problem. Here is what I changed: Transtec valve body gaskets. Transgo and Superior Shift kit combined. Sonnax Manual Valve Index. Power Torque 106 TCC. Power Torque 107 3-4. Standard Ignition...

Can anyone tell me how this goes on? I took it apart a week ago and now have valve body in and don't rememer ber.

Have a 88 ranger with a a4ld I bought the truck knowing it had tranny tranny issues off a old man said it was driving and just came to a stop one its to nice a truck to junk only 88k I checked fluid seemed pretty clean wouldn't move any gear pulled cooler line and had enough pressure shot...

Hey guys. So I have a 2WD, 2005 Sport Trac. The truck has been having numerous transmission issues, and I was told by a Ford Mechanic that it is likely due to one or more issues with the valve body, or solenoids. So, I decided to just replace them both to make sure the issue is solved. I...

94 auto transmission valve body : this part fell out, anyone know where it goes in the valve body? the part is the same on both sides, a small cylinder with indents in top and bottom: part: https://www.dropbox.com/s/f04p08lgtcubg0r/IMG_20170916_181851041.jpg?dl=0 valve body...

Hello all. Long time lurker first time with a problem I cant find the solution to. Valve body rebuild on a 1994 Mazda Navajo. A4LD. Did a rebuild following Glacier991's Rebuild Diary (http://www.explorerforum.com/forums/index.php?threads/a4ld-valve-body-rebuild-diary.137972/); and using the...

I recently changed the transmission fluid and replaced valve body gasket due to shifting problems. But now it does something strange. When I put it in reverse or neutral it's as if it is in drive and only moves forward. Anyone else every experience this?

i bought a 02 explorer 4.0 and its got the 2-3 shift problem and i was just wondering what everyone thought of this http://www.ebay.com/itm/5R55E-97-UP-4WD-VALVE-BODY-REMANUFACTURED-REBUILT-4R55E-4R44E-5R44E-VALVEBODY-/281381157143 i was going to just buy and swap this in as apposed to...

I'm new to the forums but I have been using and reading them for quite some time. I recently serviced my valve body gaskets, and everything went well up until I test drove it. Issues O/d light binking Codes: 732, 735 Truck shifts fine through gears but the RPMs are high. the truck jerks...

First off I love this site, and big thanks goes out to all who help on here. It has helped me out big time! I have a 2000 (11/99) Eddie Bauer 4.0 SOHC with automatic 4wd with 95000miles and the 5r55e tranny. The truck is awesome has given me no major problems (lots of little ones). When I...

I am posting this to help anyone experiencing the symptoms my 2005 4.6L AWD Explorer had when I bought it. I got the Explorer used at 97K miles with no history of the vehicle. I noticed at around 100K miles it appeared to slip in 5th. I researched this and found the SK5R55W/S Shift kit online...

'97 Explorer 2WD 130K mi Symptoms: 'typical 5R55E gasket symptoms' as I research this forum: dropping OD, then no 3rd, intermittent shifting of all gears for a few days my Daughter reports, but 'when it catches - it works fine' Expectation: I was hoping to find a crack/hole in the VB...

I figured since I already dropped the VB to change the gaskets, no noticeable tears/blow out on upper gasket, I would go ahead and order a new EP solenoid for the Explorer (96 EB 4X4 5R55E). Should the EP be able to twist a little while still in the valve body? To remove it do I just unbolt...

I have an automatic 1993 ford explorer 4x4 just bought it through craigslist. and when we picked it up and had about an hour and a half drive home everything seemed to be in perfect working order. very happy with purchase untill next morning when it would not shift into gear or it would seem...

Ive been noticing a lack of power, what feels like sliping (but im not sure what that feels like), its very hesitant. The fluid is black and nasty smelling, im assuming burnt, and the pan has a small fluid leak. The o/d light is not flashing though. I think its the valvue body gasket. Thanks!

Hey all, I've been lurking this forum for a couple of months and have found many threads immensly helpful, but I can't find any thread with the same problem as me and was wondering if you could possibly shead some light on my problem. Car: 1998 Ford Explorer, 4.0L SOHC Engine, 5r55e...

I have a 1986 Bronco II with an A4LD Transmission. It has a smooth 1-2 shift and the shift from 2-3 is a very high rpm (4500 roughly). After the 2-3 shift, it will not shift to 4th at all. I did not have my 2-3 shift and then I replaced the shift modulator and got that back. I have two routes I...

So I recently purchased a 2001 Ranger. Its a nice little truck and everything works. I am having some trouble with the tranny and since any problem in an auto will eventually lead to destruction, I want to be proactive. Here is what it is doing. No check engine, no bad noises, no "o/d off"...

I installed the TransGo kit, and while I have the valve body out of the x I decided to give it a thorough "rebuild". Except from the parts included in the kit, everything is going back where it belongs. I am finding several of the "plungers" (for lack of the proper term) behind the solenoids to...

so i have herd the same definition used for "limp mode" and "lockout" ether way. my sport trac 5R55E transmission has started to blink the o/d off light once i get to 45mph. the shop i took it to first said 2k full mechanical rebuild. then i took it to another shop and they said cant tell for...

Morning all! Sorry, but I accidentally posted this in the new members forum, don't know how to delete that thread... It is Memorial Day Weekend and I am about to undertake my first A4LD service with the inspiration of so many of you. First off, thank you ALL for so many postings that detail...

Hey I just went through my valve body and don't know the torque specs. Anybody have those handy. I have to fix the threads on one hole because they came out on the bolt. BTW this tranny was rebuilt last year (probably with and air wrench). The radiator leaked into the cooler lines. It had been...