2003 explorer 4.0 cranks not starts..

[Desousa93]

Hey guys this is my first post on the forum ... used to have a 96 explorer xlt sold it and a little.bit later on im now back looking at a newer explorer..

2003 explorer 4.0 automatic with a new tranny with 10k on it..


Vehicle won't start just cranks already replaced the crank sensor and still wont start. He said it might be the coil pack.. i was reading the PATS problems and waa asking the guy and he said wen he turns the ignition to ON the theft light steady blinks and keeps blinking. Says pulls up no codes on his scanner..

Is this an easy fix? Should i pick this up for 2grand?





Guy wants 2500 i saod $2k said ok..

 

[swshawaii]

Fuel cutoff inertia switch and wiring checked?

 

[Desousa93]

Fuel cutoff inertia switch and wiring checked?

Guy says he heres the fuel pump kick on wen the light goes on.

Wat wiring ?

 

[swshawaii]

Not the inertia switch if you can hear the pump. Sorry, meant inertia switch wiring connector.

 

[Desousa93]

PATS DTC CODES:

PATS Diagnostic Trouble Code (DTC) Index


PATS Diagnostic Trouble Code (DTC) Index

³ DTC ³ Flashing Fault ³ Description ³ Action ³
³ ³ Code ³ ³ ³
--------------------------------------------------------------------------------------------------------------------------------------------
³ B1213 ³ 21 ³ Anti-Theft Number of Programmed Encoded ³ GO to Pinpoint Test B1213. ³
³ ³ ³ Ignition Keys Below Minimum ³ ³
--------------------------------------------------------------------------------------------------------------------------------------------
³ B1232 ³ 12 ³ Defective Transceiver ³ GO to Pinpoint Test B1232. ³
--------------------------------------------------------------------------------------------------------------------------------------------
³ B1600 ³ 13 ³ No Key Code Received Ä Damaged Encoded ³ GO to Pinpoint Test B1600. ³
³ ³ ³ Ignition Key or Use of Non-PATS Encoded ³ ³
³ ³ ³ Ignition Key ³ ³
--------------------------------------------------------------------------------------------------------------------------------------------
³ B1601 ³ 15 ³ Unprogrammed Encoded Ignition Key (Keycode ³ GO to Pinpoint Test B1601. ³
³ ³ ³ Format OK) ³ ³
--------------------------------------------------------------------------------------------------------------------------------------------
³ B1602 ³ 14 ³ Invalid Key Code Format From Encoded ³ GO to Pinpoint Test B1602. ³
³ ³ ³ Ignition Key Transponder ³ ³
--------------------------------------------------------------------------------------------------------------------------------------------
³ B1681 ³ 11 ³ PATS Transceiver Signal Is Not Received ³ GO to Pinpoint Test B1681. ³
--------------------------------------------------------------------------------------------------------------------------------------------
³ B2139 ³ 23 ³ Security ID Does Not Match Between PATS ³ GO to Pinpoint Test B2139. ³
³ ³ ³ and PCM ³ ³
--------------------------------------------------------------------------------------------------------------------------------------------
³ B2141 ³ 22 ³ No Security ID Exchange Between PATS and ³ GO to Pinpoint Test B2141. ³
³ ³ ³ PCM ³ ³
---------------------------------------------------------------------------------------------------------------------------------------------
³ U1147 ³ 16 ³ Faulty SCP Link or Incorrect PCM ³ GO to Pinpoint Test U1147. ³
³ ³ ³ Calibration ³ ³
---------------------------------------------------------------------------------------------------------------------------------------------

Can somebody decipher this for me? idk how to read what it means..

 

[Desousa93]

Not the inertia switch if you can hear the pump. Sorry, meant inertia switch wiring connector.

I have no idea. He doesn't know much about these vehicles so I don't bthink he'd know bout the switch but says its getting fuel. guy sounds like hes my age (20).. it sounds like a little stupid problem so im trying to pick this car up for a steal quick fix it and run lol..

 

[swshawaii]

http://www.explorerforum.com/forums/showthread.php?t=387852

 

[Desousa93]

http://www.explorerforum.com/forums/showthread.php?t=387852

Thanks Man, but I already read the PATs section and says nothing about the way this is blinking with the key on.. im confused

 

[swshawaii]

Is this a Ford dealer selling the vehicle? If not, try calling the dealer for advice. GL

 

[Desousa93]

Is this a Ford dealer selling the vehicle? If not, try calling the dealer for advice. GL

ill give it a shot, and post what they say, thanks

 

[Desousa93]

F**King car got sold... thanks anyways guys