2003 HID Conversion Help!!!

ok so i have a 2003 Explorer. I bought an HID kit and put it all in but when i turn them on they aren't getting any power for some reason. when i put the old headlights back in they turn on no problems. I am wondering if anyone else has had this problem or if anyone may have any advice as to how to solve this problem seeing as HID kits should just be plug and play...

 

[Oxygen]

buy a relay on eBay, they go for like $9-10 shipped, then install the HIDs with the relay kit.. see if that fixes the problem

 

[Oxygen]

http://cgi.ebay.com/HID-Fuse-Relay-...emQQptZLH_DefaultDomain_0?hash=item27aba31fb9

obviously you need the 9006 relay

 

[spitfire1681]

Thanks i ordered the kit and will update with the outcome of using it

 

[Bill Kemp]

Make sure your grounds a really well grounded.

 

[1Bad04]

Check the polarity between the factory harness and ballast (or relay) plug.

 

[xplorer03]

^^^^ agreed some times u have to flip the plug around

 

[gforceman]

i used relays on both ballasts .. best way