Jayson Carpenter
New Member
- Joined
- January 14, 2020
- Messages
- 1
- Reaction score
- 0
- City, State
- Fort Collins
- Year, Model & Trim Level
- 2005 Explorer XLT
- Callsign
- W0OY
Hi everyone!
I just bought a used 2005 Explorer and I am going to start installing my radios in it. Thought I would share how I would do it.
Below is the factory radio setup.
Below is a sample of my install. Installed radio will be Cobra 29LX. I will be using a Larsen NMO27B antenna on a Larsen NMO mount which gets delivered in a couple days.
I like a clean instal so my CB will go in the dash along with a single DIN aftermarket radio.
I will write this one up and post it for those interested.
I just bought a used 2005 Explorer and I am going to start installing my radios in it. Thought I would share how I would do it.
Below is the factory radio setup.
Below is a sample of my install. Installed radio will be Cobra 29LX. I will be using a Larsen NMO27B antenna on a Larsen NMO mount which gets delivered in a couple days.
I like a clean instal so my CB will go in the dash along with a single DIN aftermarket radio.
I will write this one up and post it for those interested.
