newtoford1
New Member
- Joined
- August 3, 2014
- Messages
- 1
- Reaction score
- 0
- Year, Model & Trim Level
- 2008 Eddie Bauer V6
Hi, I have been trying to get my entry keypad to work without any luck.
It's completely dead no lights nothing. I've replaced the keypad and still nothing. i check the voltage in the connector and i'm getting about 12v from the first two pin holes, the second two pin holes have about 7.5v and the third set of pin holes have no voltage. i did have my PCM computer changed a year or so ago, but it was still not working then. Any help would be great.
It's completely dead no lights nothing. I've replaced the keypad and still nothing. i check the voltage in the connector and i'm getting about 12v from the first two pin holes, the second two pin holes have about 7.5v and the third set of pin holes have no voltage. i did have my PCM computer changed a year or so ago, but it was still not working then. Any help would be great.