2015 Fog light replacement

[Lumpy315]

Is there a DIY on how to replace 2015 explorer fog light? I just found my drivers side broken.

 

[Keith N]

I replaced one in my 2011 this past year. Was very easy. Drive car on ramps. Disconnect plug to light assy. 4 screws hold it in. They are a little tight to get to all 4 but doable with right length socket extensions and swivels. Might have been an 8mm or 10mm bolt head. 30 min job.

Keith

 

[Querys]

Its quite easy. You need to remove the front part of the inner fender liner to access the screws.
I replaced mine with aftermarket LED lights. I made some pictured, maybe these will help you, but I removed the entire front bumper, but you will not need to do this.
LED DRL, Fog and Positioning Lights

 

[peterk9]

Is there a DIY on how to replace 2015 explorer fog light? I just found my drivers side broken.

Welcome to the Forum.

Peter