reserved50
Explorer Addict
- Joined
- April 21, 2005
- Messages
- 1,267
- Reaction score
- 57
- Year, Model & Trim Level
- 2013 Sport Exploder
when I went 2" lower than stock on the rear the u-joints were out of phase and a vibration/rumble at over 60mph, anyone feel it? Im wondering if only V8s have the anti-wrap whatever upper control arms bolted to the rear axle housing which might alter the angle, if so it might have to be lenghtened/shortened with/without angled leaf to axle shims to correct for the difference from the trans output shaft to the pinion angle
... if the pinion was about a degree or two on a different plane than the output shaft you will have a horrible vibration
... if the pinion was about a degree or two on a different plane than the output shaft you will have a horrible vibration