Dismiss Notice



Register Today It's free! This box will disappear once registered!

Aiming fog lights...

Discussion in 'General Explorations!!' started by Mikes95XLT, September 23, 2002.

^^Searches ExplorerForum.com^^
  1. Mikes95XLT

    Mikes95XLT Active Member

    Joined:
    September 18, 2002
    Messages:
    991
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Bartlett, IL (currently in Bloomington for school)
    Year, Model & Trim Level:
    '95 XLT
    Okay I just replaced one of the fog light housings on my '95, and it came with a new fog light and lens etc. But now when I turn on my fog lights at night, I can notice the one I replaced isn't shining as far as the one that was not replaced. How do I aim the light? Is there a screw to turn or something? Any info would be appreciated.....
     
  2. Support EF

    Join the Elite Explorers for $20

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


  3. yob_yeknom

    yob_yeknom Moderator Emeritus

    Joined:
    November 14, 2000
    Messages:
    4,394
    Likes Received:
    0
    Trophy Points:
    46
    City, State:
    Glade Hill, Virginia
    Year, Model & Trim Level:
    '97 XLT & '06 Limited
    There is a nut on them. Loosen it and point the light where you want then tighten it back.
     
  4. Mikes95XLT

    Mikes95XLT Active Member

    Joined:
    September 18, 2002
    Messages:
    991
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Bartlett, IL (currently in Bloomington for school)
    Year, Model & Trim Level:
    '95 XLT
    It's like a bigger nut right? Cause the light was loppsided when I put it in, and I loosened the nut to turn the light so it looked right in the hole in the bumper. Is that the same nut?
     
  5. topo4u2

    topo4u2 Active Member

    Joined:
    September 11, 2002
    Messages:
    125
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Ontario Canada
    Year, Model & Trim Level:
    1995 XLT
    Hi Mike,

    Yes there is a large nut, I think around 15mm that you loosen and can adjust the fog lights. I just had mine apart the other day. this nut assembly is on a swivel so you can rotate up, down and sideways. May I recommend you adjust them in front of a wall?
     






We Support Our Troops!