Ambient Air Temp Sensor Replacement | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Ambient Air Temp Sensor Replacement

jmr061

Explorer Addict
Joined
August 24, 2014
Messages
2,037
Reaction score
213
City, State
Wisconsin
Year, Model & Trim Level
16 Exp Sport
Removal

NOTE: If replacing the Ambient Air Temperature sensor a reset must be performed. Select the A/C and Recirc buttons simultaneously, then release both, Within 2 seconds select A/C button again.

  1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Section 100-02, Jacking and Lifting.
  1. Detach the lower bumper grill from the lower bumper by pushing the grill toward the rear of the vehicle at each of the fastener locations. Once the grille is detached, position the grille out of the way inside the lower bumper to gain access to the ambient air temperature sensor.
 






Anyone have any tips on replacing the front ambient air temp sensor? I can see where it is in the lower front bumper (behind the lower grill) but am not sure where to start. Do I have to remove the entire front bumper? 2014 Ford Explorer XLT.
 






Welcome to the Forum.:wave:
Found the following post using the 'Search' feature )upper right). Hopefully it will help. Ambient Air Temperature Issue

Peter
 






Back
Top