Dismiss Notice



Register Today It's free! This box will disappear once registered!

Backup Camera Hitch Plug

Discussion in 'Stock 2006 -2010 Explorers' started by jmarreroi, June 29, 2011.

^^Searches ExplorerForum.com^^





  1. jmarreroi

    jmarreroi New Member

    Joined:
    January 23, 2009
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Puerto Rico
    Year, Model & Trim Level:
    2010 XLT
    Hi Guys:
    I just bought a wireless transmitter for a backup camera to install in my 10' explorer, my plans are to install the camera inside the Hitch hole, but, I'm planning to take the transmitter elec. from the hitch plug. My question is, someone know what cable is the 12+ and where to make ground or - in this connector?

    Thanks
     
  2. Support EF

    Join the Elite Explorers for $20

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


  3. michael loibl

    michael loibl Active Member

    Joined:
    February 9, 2007
    Messages:
    557
    Likes Received:
    40
    Trophy Points:
    38
    City, State:
    maywood, new jersey
    Year, Model & Trim Level:
    2006 eddie bauer
    If you have the four pin flat connector, you dont have a constant 12 volt + source, only a ground, tail light, left signal, and right signal. If you have a 7 pin round connector, you do have what you need and i believe + is about the 1 or 2 O'clock position but it should be marked on the cover.
     

Share This Page







We Support Our Troops!