1. Tip...
    If you hold most smartphones sideways
    you can bring up a more full featured version of the forum.
    Dismiss Notice
Dismiss Notice



Register Today It's free! This box will disappear once registered!

Brakes Need Help

Discussion in 'Under the Hood' started by hitman17mk, January 2, 2005.

  • Searches ExplorerForum.com
    1. hitman17mk

      hitman17mk New Member

      Joined:
      October 12, 2004
      Messages:
      45
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Southwick, MA
      Year, Model & Trim Level:
      2002 Eddie Bauer
      ok, i got a huge brake leak, it is the hydrolic control unit (the thin the master brake cylinder connects to) and one of the 3 silver things stickin out is lettin brake fluid out like a super soaker everytime i hit the brakes, and i was wonder howe this will cost cuase i doubt it can be fixed, or what i can do to gain more pressure till ig et it fixed, i use a epoxy and it got me a little pressur ebut not much, and i got 94 limited wit abs so i think it might cost a pretty penny, any help appreciated

      thanks
      mike
       
    2. Support EF

      Join the Elite Explorers for $20

      Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself, and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


      to hide adverts.
    3. mrboyle

      mrboyle I Drive By Brail Moderator Emeritus

      Joined:
      February 18, 1999
      Messages:
      4,143
      Likes Received:
      0
      Trophy Points:
      48
      City, State:
      Montrose, CO
      Year, Model & Trim Level:
      '95 Bronco '80 Toy
      Where is the leak comming from? Is it the "silver things stickin out" aka brake line. Or is it actually comming from the "hydrolic control unit" aka ABS hydraulic control valve? If its coming from the line, you can replace it (but you will need to make a new one since prebent lines are not available). If its comming from the valve, the only fix is to replace the entire unit with a used (wrecking yard) or remanufactured unit.
       

    Share This Page







    We Support Our Troops!