Dismiss Notice



Register Today It's free! This box and some ads will disappear once registered!

correct parts #'s 4.0sohc guides & tensioners with pics...

Discussion in 'Stock 1995 - 2001 Explorers' started by project92, October 24, 2008.

^^Searches ExplorerForum.com^^





  1. project92

    project92 Active Member

    Joined:
    February 11, 2003
    Messages:
    390
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    missouri
    Year, Model & Trim Level:
    00E.B.,93 xlt 92 xlt
    okay I did not have the left/right cam problems mine was the main chain and balance shaft trouble was finding the parts numbers I searched on here the internet and the Ford dealers... finally found One out of 5 Ford dealers that knew what I need so here we go
     

    Attached Files:

    Last edited: October 27, 2008
  2. Support EF

    Elite Explorer 2 for 1 Sale! $20 for 2 years!

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.



  3. project92

    project92 Active Member

    Joined:
    February 11, 2003
    Messages:
    390
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    missouri
    Year, Model & Trim Level:
    00E.B.,93 xlt 92 xlt
    part 2
     

    Attached Files:

  4. project92

    project92 Active Member

    Joined:
    February 11, 2003
    Messages:
    390
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    missouri
    Year, Model & Trim Level:
    00E.B.,93 xlt 92 xlt
    okay you see most has there part numbers but her is a rundown...

    F77Z6K297BC. BS GUIDE $11.77
    2L2Z6K297AA.MAIN CHAIN GUIDE $10.85
    1L2Z6L266AA. BS TENSIONER.$19.30
    YL2Z6L266AA. MAIN CHAIN TENSIONER. $42.78
    F77Z6020AB. TIMING CHAIN COVER $ 10.83

    Other parts of interest...

    YL2Z9461AA. TOP HALF OF INTAKE $1.85 EACH (6)
    YL2Z9E436AA. BOTTOM GASKET OF INTAKE $4.53 EA. (2)

    and don't forget the tool kit 6488 also you may need a oil pan gaskets I'll get them number later

    most part are cheeper at ford becuase the local auto parts don't sell just the guides or tensioners they have to sell them in sets which includes chains and run over $100 buck a piece... you can get a whole 4 chain kit for $577 from carquest:eek:

    okay the internet is good and bad...

    don't get the TC gaske from ford it's 10 bucks, you can got to oreilly's and get the TC kit and get all the gaskets you need (SEE PICS BELOW)..
    also the kit for the upper is cheeper at oriell's also it's just there web page doesn't show the correct set so I spent a extra 10 bucks at the Ford dealer because of this.. the kit is 14-16 at most auto parts stores (pics below..
     
    Last edited: October 27, 2008
  5. project92

    project92 Active Member

    Joined:
    February 11, 2003
    Messages:
    390
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    missouri
    Year, Model & Trim Level:
    00E.B.,93 xlt 92 xlt
    pics of parts
     

    Attached Files:

  6. project92

    project92 Active Member

    Joined:
    February 11, 2003
    Messages:
    390
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    missouri
    Year, Model & Trim Level:
    00E.B.,93 xlt 92 xlt
    last set for a while
     

    Attached Files:

    • top.jpg
      top.jpg
      File size:
      51.7 KB
      Views:
      12,311
    • top1.jpg
      top1.jpg
      File size:
      40.1 KB
      Views:
      12,158
  7. CDW6212R

    CDW6212R Hauls the mail. Elite Explorer

    Joined:
    June 17, 2004
    Messages:
    19,615
    Media:
    5
    Albums:
    1
    Likes Received:
    1,125
    Trophy Points:
    143
    City, State:
    Knoxville, TN
    Year, Model & Trim Level:
    98 Limited AWD
    The rear tensioner often forgotten is 7U3Z-6K254-A. That's the easiest part to change. I'll try to post the front cam chain tensioner kit later, the 00M12 kit that has the upper gaskets and check valve in it together with the kit. Good thread, a parts number list.
     
  8. eXploring aussie

    eXploring aussie New Member

    Joined:
    November 29, 2008
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Melbourne, VIC
    Year, Model & Trim Level:
    98' eXplorer XLT
    Thanks mate.
    It's the most straight forward parts list I've found so far...
    Now to find a way of getting it shipped over here ???
    The cost through the dealers here is over $5000+ So I'll be doing it myself over the holidays...:thumbsup:
     
  9. eXploring aussie

    eXploring aussie New Member

    Joined:
    November 29, 2008
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Melbourne, VIC
    Year, Model & Trim Level:
    98' eXplorer XLT
    One Q is the tool kit 6488

    Is they the tools for the timing and balancer ???
    A bit shady and confused with all the info I've been reading...
    Thanks in advance
    :confused:
     
  10. CDW6212R

    CDW6212R Hauls the mail. Elite Explorer

    Joined:
    June 17, 2004
    Messages:
    19,615
    Media:
    5
    Albums:
    1
    Likes Received:
    1,125
    Trophy Points:
    143
    City, State:
    Knoxville, TN
    Year, Model & Trim Level:
    98 Limited AWD
    FYI, one more part and Ford number, the rear block cover(plug) is F77Z 6026 AB.
     
  11. nobodyfresh

    nobodyfresh New Member

    Joined:
    September 30, 2008
    Messages:
    25
    Likes Received:
    0
    Trophy Points:
    0
    Does the intake have to come off the complete this job? I've seen a few write-ups and some indicate removal and some have no mention of it. I'd like to be able to remove just the alternator bracket, fan/waterpump/timing cover, move the PS, and radiator. :)

    I'm not too worried about anything moving because I'm only planning on replacing the plastic parts and the other day I completed the 00m12 kit installation.
     
    Last edited: December 8, 2008
  12. CDW6212R

    CDW6212R Hauls the mail. Elite Explorer

    Joined:
    June 17, 2004
    Messages:
    19,615
    Media:
    5
    Albums:
    1
    Likes Received:
    1,125
    Trophy Points:
    143
    City, State:
    Knoxville, TN
    Year, Model & Trim Level:
    98 Limited AWD
    Yes the upper intake needs to come off to do the work, even the front stuff. You don't have to remove the radiator, just be very careful around it. get the right tool to pull the balancer, that's tricky with so little space, and the odd tool bolt sizes.
     
  13. 2000XLT4X4

    2000XLT4X4 New Member

    Joined:
    May 22, 2006
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Chicago, IL
    Year, Model & Trim Level:
    2000 XLT
    Pics?

    The pics aren't showing. Were these originally posted on a photohosting site and the links are now bad?
    Would be great if they worked. Otherwise, good thread.
    Thanks,
    Bill
     
  14. IZwack

    IZwack Moderator Emeritus

    Joined:
    February 5, 2003
    Messages:
    21,772
    Likes Received:
    15
    Trophy Points:
    68
    City, State:
    Germantown, MD
    Year, Model & Trim Level:
    1998 Ford Explorer
    Pics work for me.

    I even singed off and pics still show so its not an Elite vs non-Elite thing.
    And they're not hosted on a photo hosting site, they are attached directly attached to the reply and are hosted on this forum.
     
  15. CDW6212R

    CDW6212R Hauls the mail. Elite Explorer

    Joined:
    June 17, 2004
    Messages:
    19,615
    Media:
    5
    Albums:
    1
    Likes Received:
    1,125
    Trophy Points:
    143
    City, State:
    Knoxville, TN
    Year, Model & Trim Level:
    98 Limited AWD
    Ditto, there are lots of pictures of good new Ford parts.
     
  16. 2000XLT4X4

    2000XLT4X4 New Member

    Joined:
    May 22, 2006
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Chicago, IL
    Year, Model & Trim Level:
    2000 XLT
    That's odd. All I get are the boxes with the red X.
    Most, but not all, of the other threads seem to work.
    Bill
     
  17. Abadr1

    Abadr1 New Member

    Joined:
    June 26, 2009
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Bushwacker, AL
    Year, Model & Trim Level:
    2002 SportTrac
    Greetings guys, my Sport Trac has been doing the death rattle and I have been doing some research. I am going to replace the two tensioner, but I keep hearing people say the check valve. Is the Check Valve a different part or is it inside the tensioner?

    Thanks in advance.:)
     
  18. bluestream1

    bluestream1 Active Member

    Joined:
    November 9, 2005
    Messages:
    949
    Likes Received:
    0
    Trophy Points:
    16
    City, State:
    Waterloo Ontario
    Year, Model & Trim Level:
    2000 XLT 4.0 SOHC 4X4
    The check valve is part of the tensioner for the left side chain. It comes in the kit YL2Z-9E473-AA which costs around $50. This was the kit used in the 00M12 owner notification program from years ago. It was used to correct the start up rattle on a cold engine when the tensioner got weak.

    If you have an on-going rattle it is likely the primary timing chain that goes from the crank to the Jackshaft, although it could mean that your left tensioner is totally done and the cam chain is loose.
     
    Last edited: July 23, 2009
  19. CDW6212R

    CDW6212R Hauls the mail. Elite Explorer

    Joined:
    June 17, 2004
    Messages:
    19,615
    Media:
    5
    Albums:
    1
    Likes Received:
    1,125
    Trophy Points:
    143
    City, State:
    Knoxville, TN
    Year, Model & Trim Level:
    98 Limited AWD
    There you go Leo, try that YL2Z-9E473-AA for the small kit that doesn't require timing tools.

    It's $44 from Tasca, but confirm that with a local Ford parts department as to content. I haven't checked on that part number, let's hope it's the one I mentioned for the left cam chain. http://www.tascafordparts.com
     
  20. haywood

    haywood New Member

    Joined:
    February 13, 2010
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    virginia
    Year, Model & Trim Level:
    99 xlt
    timing chains

    good morning about the timing chains--does the engine have to be removed in order to to the job on 99 explorers 2 whl drives
     
  21. haywood

    haywood New Member

    Joined:
    February 13, 2010
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    virginia
    Year, Model & Trim Level:
    99 xlt
    timing chain replacement

    does the enging have to be removed to do the repair
     

Share This Page







We Support Our Troops!