1. Tip...
    If you hold most smartphones sideways
    you can bring up a more full featured version of the forum.
    Dismiss Notice
Dismiss Notice



Register Today It's free! This box will disappear once registered!

Detailed engine,now intermittent misfire.

Discussion in 'Under the Hood' started by CJL, June 28, 2011.

^^Searches ExplorerForum.com^^





  1. CJL

    CJL Active Member

    Joined:
    February 19, 2009
    Messages:
    102
    Likes Received:
    0
    Trophy Points:
    0
    Year, Model & Trim Level:
    2000 AWD Ex
    I Detailed(low pressure water) my 5.0 engine,now I have a intermittent misfire(shake).

    I removed connectors looking for water but found none.

    Whats the most sensitive component under the hood? Coil packs?
     
  2. Support EF

    Join the Elite Explorers for $20

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


  3. Turdle

    Turdle Freelance Stuntman Staff Member Moderator Elite Explorer

    Joined:
    June 16, 2003
    Messages:
    29,025
    Likes Received:
    795
    Trophy Points:
    143
    City, State:
    Humboldt, KS
    Year, Model & Trim Level:
    2000 Mounty
    Probably arcing at the spark plug wire boots. You could run the engine and have someone lower the hood over you a bit to make the engine compartment dark so you can see where it is arcing. You might have just found a bad spark plug wire, even if they are relatively new.
     
  4. CJL

    CJL Active Member

    Joined:
    February 19, 2009
    Messages:
    102
    Likes Received:
    0
    Trophy Points:
    0
    Year, Model & Trim Level:
    2000 AWD Ex
    Thanks for the input.

    I put dielectric(tuneup) grease on all main sensors and the ecu under the hood,drove a round the block and everything seems to be good,misfire gone.

    I have no CEL but I threw the scanner on it for giggles and found codes P0113 and P0102.

    Any input?
     

Share This Page







We Support Our Troops!