duff 2.5 lift and 32s??

If I put a james Duff 2.5 lift kit on my '93 explorer, can I run 32s w/out rubbing on stock wheels???

 

[appx91]

Very good chance you will be able to. My cousin ran 32's on the skyjacker 2 inch kit.

 

[Robb]

32x?

Width is a very important factor in this equation.

 

[ZachMan]

32x?

Width is a very important factor in this equation.

Most radials will be 32x11.50

 

[Makahveli]

no u may need wheel spacers, stock wheels supply to much back spacing for 32's. You sure won't be able to place mudflaps on our front tires with out rubbing

 

[Makahveli]

or you could just get after market spaced out wheels

 

[AlaskanJack]

you will be fine. Your rear may rub the inside of the fenderwell on full stuff. I have 32x11.5's on stock rims and 1.5" lift coils and f150 spacer in front, AAl and Warrior shackles in rear. they were just fine. I have since added a 2" BL but that was more for my offroad bumper.

 

[Makahveli]

I agree just will rub a bit when turing