Randyr3554
New Member
- Joined
- August 9, 2012
- Messages
- 2
- Reaction score
- 0
- City, State
- Corunna, Ont,
- Year, Model & Trim Level
- 2005 Aviator
I am running a 1974 rebuilt 302 with a 4 bbl carb. It apparently not legal due to the fact that it doesn't have the required emissions equipment (EGR) on it.
I have the EGR adapter plate, but the stock 1960's manifold doesn't have the port in the flange to match it. Instead of changing the manifold, I am thinking I could drill a small hole down into the exhaust crossover to match the port on the plate.
Think this will work?
Anyone done it before?
I have the EGR adapter plate, but the stock 1960's manifold doesn't have the port in the flange to match it. Instead of changing the manifold, I am thinking I could drill a small hole down into the exhaust crossover to match the port on the plate.
Think this will work?
Anyone done it before?
