Dismiss Notice



Register Today It's free! This box will disappear once registered!

HELP if you have 5.5 inch lift..

Discussion in 'Shocks, Suspensions, Lift Kits' started by Adam Foote, October 3, 2002.

  • Searches ExplorerForum.com
    1. Adam Foote

      Adam Foote Active Member

      Joined:
      December 9, 2001
      Messages:
      926
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Katy, Texas
      Year, Model & Trim Level:
      92 XLT
      I know i could probably search for this but im just gonna ask everyone else... what degree cambers are you using with the 5.5 inch superlift? mine are just not big enough
       
    2. Support EF

      Join the Elite Explorers for $20

      Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


      to hide adverts.
    3. madmike

      madmike Elite Explorer

      Joined:
      August 20, 2001
      Messages:
      981
      Likes Received:
      0
      Trophy Points:
      16
      City, State:
      Yuma, AZ
      Year, Model & Trim Level:
      '92 xlt, 93 SAS xlt
      I have the same lift and my camber adjustment is just fine with the stock setup, just get a 12mm star socket and loosen them up and take a chisel or screwdriver and hammer and move to where they are straight up and down. :confused:
       
    4. Adam Foote

      Adam Foote Active Member

      Joined:
      December 9, 2001
      Messages:
      926
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Katy, Texas
      Year, Model & Trim Level:
      92 XLT
      mad mike..... you scare me.. i didnt understand what you meant...

      ok now i get it... does it work good and stay like that?
       
    5. RON COX

      RON COX Active Member

      Joined:
      April 27, 1999
      Messages:
      377
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Las Vegas, NV
      Year, Model & Trim Level:
      '91 X, 4 dr. & 03 Ranger
      I think I had to get 2-1/4 or 2-1/2 degree cams.
       
    6. special ed

      special ed Member

      Joined:
      October 21, 2000
      Messages:
      87
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      York PA
      Year, Model & Trim Level:
      94 XLT 4x4
      I am still using the stock cams
      i used a hammer and a screw driver and tapped them until they were straight up and down
      kinda what MadMike did
       
    7. Adam Foote

      Adam Foote Active Member

      Joined:
      December 9, 2001
      Messages:
      926
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Katy, Texas
      Year, Model & Trim Level:
      92 XLT
      did you have to jack the front up to do so? i dont really understand i would like more details please...
       

    Share This Page







    We Support Our Troops!