1. Tip...
    If you hold most smartphones sideways
    you can bring up a more full featured version of the forum.
    Dismiss Notice
Dismiss Notice



Register Today It's free! This box will disappear once registered!

I Screwed Up - IAT Sensor & Pigtail Needed

Discussion in 'Under the Hood' started by BuffaloXplorer, December 19, 2004.

  • Searches ExplorerForum.com
    1. BuffaloXplorer

      BuffaloXplorer The X had to go!

      Joined:
      April 5, 2004
      Messages:
      1,424
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Buffalo, New York
      Year, Model & Trim Level:
      2006 Impala SS
      Well, after i finished cleaning the TB earlier this week, i screw up and did not replace the IAT into the intake tube. Well, as you may have already been thinking, it's no longer there. The constant rubbing with the serpentine belt and/or fan has completely removed it from the system, along with the plug and about 2-3 inches of wire.

      What years can i look at for a replacement? I've got a '96 OHV6.

      If anyone is parting out their x, let me know.
       
    2. Support EF

      Join the Elite Explorers for $20

      Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself, and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


      to hide adverts.
    3. BuffaloXplorer

      BuffaloXplorer The X had to go!

      Joined:
      April 5, 2004
      Messages:
      1,424
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Buffalo, New York
      Year, Model & Trim Level:
      2006 Impala SS
      Autozone has an "Air Charge Temperature Sensor" - p/n SU2004 - is this the sensor i'm looking for? I think this is it, b/c it asks if is the the push in or screw in type. I need the push-in type and still need the plug, too.

      They've also got an "Ambient Temp. Sensor" - p/n SU2181 - but it's special order only.
       
    4. Billy177

      Billy177 Well-Known Member

      Joined:
      July 10, 2003
      Messages:
      1,899
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Redding CT
      Year, Model & Trim Level:
      99 Explorer XLT SOHC 4x4
      you could solder the wires directly to the sensor and get some kind of connector like this [​IMG]
       
    5. Eneurb

      Eneurb Active Member

      Joined:
      December 19, 2004
      Messages:
      707
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Ajax, Ontario, Canada
      Year, Model & Trim Level:
      1998 Limited
      Go to your local Ford dealer, they have recently made available hundreds of common wiring connectors and hard shells, and they are not at all expensive.
       
    6. BuffaloXplorer

      BuffaloXplorer The X had to go!

      Joined:
      April 5, 2004
      Messages:
      1,424
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Buffalo, New York
      Year, Model & Trim Level:
      2006 Impala SS
      thanks for the input...still not sure if the autozone sensor is what i need, but i'm sure if i actually got off my a$$ and went to the store i could tell if i saw it.
       
    7. BuffaloXplorer

      BuffaloXplorer The X had to go!

      Joined:
      April 5, 2004
      Messages:
      1,424
      Likes Received:
      0
      Trophy Points:
      0
      City, State:
      Buffalo, New York
      Year, Model & Trim Level:
      2006 Impala SS
      DOH! I shouldn't have thrown out my eBay HP mod (resistor) last month - i could've slapped that baby in there and "Bye-Bye CEL!"

      Hey, Chopin, wanna mail me one?
       

    Share This Page







    We Support Our Troops!