Keyless Entry System

[Mike02]

Hope someone can help with this problem:
I just picked up a used 2000 Navigator and need help with the factory set code for the key pad on the door. Don't know how to get this code so i can program my own in.

I use this fourm for my Explorer and thought someone could help or direct me to a Navigator fourm.

Thank's Mike

 

[Xzibit A]

3 options
1 find the little white car that comes with the owners manual
2 take it to a dealership and let them retrieve it usually around 40 bucks
3 find the central security module and it will say the code on it, i cannot remember where is it on the navs

 

[gijoecam]

It's simple:

1) Sit in the driver's seat and look at your left foot. Remember where it is.

2) Exit the truck and lay down on the driver's side floor, placing your head where your left foot just was and look up the firewall.

3) About 8" up the firewall, there is a white or gray box with a white sticker on the front. On this sticker is a 5-digit code. That is your master code.

For pics, click on the link to my gallery in my signature and view the 'RAP Module Location' gallery from the pull-down menu.

-Joe

 

[Mike02]

Thank's Joe I will try looking for this sticker this weakend. Sure saved me a lot of time looking under covers and around corners.

Mike!!!