Paul Fithian
Elite Explorer
- Joined
- October 12, 2016
- Messages
- 336
- Reaction score
- 106
- City, State
- Long Beach, IN
- Year, Model & Trim Level
- 2007 Job 1 RWD V8 Limited
I can attest that Krylon SUPERMAXX paint has outstanding adhesion to the polyproplyene molded cladding on the Sport Trac.
I prepped a spot on the front bumper by washing with Dawn soap & water, then a wipe with acetone on a lint free cloth.
Three coats of Satin Black SUPERMAXX were applied and allowed to cure for 5 days. No primer was used.
There was no peeling of the paint after a piece of duct tape was pressed hard onto the surface. There was no paint residue on the duct tape adhesive.
I did find, however, that acetone on a paper towel would wipe it off, even after 5 days of cure.
I will paint my cladding with SUPERMAXX Satin Black. I don't plan on wiping down the cladding with acetone.
I prepped a spot on the front bumper by washing with Dawn soap & water, then a wipe with acetone on a lint free cloth.
Three coats of Satin Black SUPERMAXX were applied and allowed to cure for 5 days. No primer was used.
There was no peeling of the paint after a piece of duct tape was pressed hard onto the surface. There was no paint residue on the duct tape adhesive.
I did find, however, that acetone on a paper towel would wipe it off, even after 5 days of cure.
I will paint my cladding with SUPERMAXX Satin Black. I don't plan on wiping down the cladding with acetone.
