Dismiss Notice



Register Today It's free! This box and some ads will disappear once registered!

Lights mods!

Discussion in 'Modified 2011- 2019 Explorers - Tuning & Mods' started by kuko, October 11, 2014.

^^Searches ExplorerForum.com^^



Do Not Sell My Personal Information



  1. kuko

    kuko Member

    Joined:
    August 2, 2014
    Messages:
    54
    Likes Received:
    5
    Trophy Points:
    18
    Year, Model & Trim Level:
    2014 Explorer Base
  2. Support EF

    Join the Elite Explorers for $20.

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.



  3. WOLFexplorer

    WOLFexplorer Active Member

    Joined:
    February 25, 2013
    Messages:
    125
    Likes Received:
    2
    Trophy Points:
    0
    City, State:
    Massachusetts
    Year, Model & Trim Level:
    2011 Explorer Limited
    looks good, can you give more info on the bumper lights. easy to install? connected to brake lights?
     
  4. kuko

    kuko Member

    Joined:
    August 2, 2014
    Messages:
    54
    Likes Received:
    5
    Trophy Points:
    18
    Year, Model & Trim Level:
    2014 Explorer Base
    I just used the dremel to carve and opening on the wider end to insert the led strips, reseal them with silicone and connected to the trailer plug, no need to mess with the tail lights. I am using them as running lights but can also be wired as stop/turn signal.
     
  5. mhikeboy

    mhikeboy Active Member

    Joined:
    August 14, 2012
    Messages:
    140
    Likes Received:
    5
    Trophy Points:
    18
    City, State:
    Dubai
    Year, Model & Trim Level:
    2012 Explorer XLT
    Hi, looks good! can you take a more closed up shot and with the light off so I could see how the led strip looks when switched off? and, did you have to remove the reflector off the bumper to install or did you dremel it while the reflectors are on the bumper? Thanks
     
  6. kuko

    kuko Member

    Joined:
    August 2, 2014
    Messages:
    54
    Likes Received:
    5
    Trophy Points:
    18
    Year, Model & Trim Level:
    2014 Explorer Base
    I can take a picture for you but you really can't see the led strip when they are off, and I did remove them to dremel the opening on the backside, they pop out really easy if you look behind the bumper you will see one tab on each end.
     
  7. breshi

    breshi Member

    Joined:
    July 24, 2013
    Messages:
    85
    Likes Received:
    1
    Trophy Points:
    18
    Year, Model & Trim Level:
    2013 Ex Limited FWD V6
    I really like those. is there a gap between the lens and the back plate? What led's did you use?
     
  8. kuko

    kuko Member

    Joined:
    August 2, 2014
    Messages:
    54
    Likes Received:
    5
    Trophy Points:
    18
    Year, Model & Trim Level:
    2014 Explorer Base

Share This Page







We Support Our Troops!