Dismiss Notice



Register Today It's free! This box and some ads will disappear once registered!

Manual BW 13-54 swap info needed

Discussion in 'Offroad Projects' started by Joe93, October 3, 2001.

^^Searches ExplorerForum.com^^





  1. 95exploderboy

    95exploderboy Locked and Loaded

    Joined:
    August 12, 2002
    Messages:
    914
    Likes Received:
    1
    Trophy Points:
    0
    City, State:
    Annapolis, MD and Lebanon, PA
    Year, Model & Trim Level:
    1995 Sport
    I took the CAD cover off and bolted the shift fork into the engaged position. Then slid the shift coller over the splines and reinstalled the cover and fork. You can also use a one piece axel shaft from a newer Ex, but my method worked fine for years, even with a front locker.
     
  2. Support EF

    Join the Elite Explorers for $20

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.



  3. Glen4X4

    Glen4X4 Explorer Addict

    Joined:
    June 5, 2007
    Messages:
    5,504
    Likes Received:
    2
    Trophy Points:
    58
    City, State:
    Lewistown, Pa
    Year, Model & Trim Level:
    2000 XLS
    Ok, thanks for the tip, I like that idea, I was considering replacing the shaft but figure I'll try using what I have and if yours worked for years then I'll give it a shot, did you happen to make a write-up about it?
     
  4. 99XLT-Explorer

    99XLT-Explorer Active Member

    Joined:
    July 13, 2012
    Messages:
    120
    Likes Received:
    0
    Trophy Points:
    16
    City, State:
    inverness FL
    Year, Model & Trim Level:
    1999 xlt explorer 4.0SOHC
    sorry for digging up such a old thread but im getting ready to do a 1350 swap to my auto trans i have the slip yoke front output on the tc i need to know what trucks i can get my front driveshaft from i have the cv style driveshaft on my explorer definitly not going to work. sooo i know i can get the driveshaft from a bronco 2 but i need to know the lengths of the one i need and i cant find that info anywhere.
     
  5. jtexplorer

    jtexplorer Member

    Joined:
    January 16, 2008
    Messages:
    59
    Likes Received:
    1
    Trophy Points:
    8
    Location:
    58503
    City, State:
    Bismarck, ND
    Year, Model & Trim Level:
    1987 Bronco II
    Does anyone know an updated part number for the shift linkage?
     

Share This Page







We Support Our Troops!