1. Tip...
    If you hold most smartphones sideways
    you can bring up a more full featured version of the forum.
    Dismiss Notice
Dismiss Notice



Register Today It's free! This box will disappear once registered!

Need Help!

Discussion in 'Modified 2002 - 2005 Explorers' started by mattd08, July 2, 2011.

^^Searches ExplorerForum.com^^





  1. mattd08

    mattd08 Member

    Joined:
    January 19, 2011
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Bristol, Va
    Year, Model & Trim Level:
    02 XLT
    Im installing my CAI right now, im having trouble getting the bottom of the stock airbox out of my Ex. How does it come out (the right way)?

    Thanks,

    Matt
     
  2. Support EF

    Join the Elite Explorers for $20

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


  3. TheTurk

    TheTurk New Member

    Joined:
    June 8, 2011
    Messages:
    36
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Lyndhurst, New Jersey
    Year, Model & Trim Level:
    '03 XLT 4.6L
    pull it harder :)
    try to put a strong screw driver or a short pry bar under the airbox from the motor side and lift it slowly , dont forget there is two more plastic clips on the side ..
    good luck :thumbsup:
     
  4. mattd08

    mattd08 Member

    Joined:
    January 19, 2011
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Bristol, Va
    Year, Model & Trim Level:
    02 XLT
    For some reason i cannot get the 2 clamps out of the side. Any suggestions?
     
  5. TheTurk

    TheTurk New Member

    Joined:
    June 8, 2011
    Messages:
    36
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Lyndhurst, New Jersey
    Year, Model & Trim Level:
    '03 XLT 4.6L
    yea the little inlet hose wont let go sometimes (the one looking towards ur headlight)
    try to loosen that little bit and then try again....
     
  6. fedyfedz

    fedyfedz Active Member

    Joined:
    April 26, 2010
    Messages:
    898
    Likes Received:
    2
    Trophy Points:
    16
    City, State:
    Suffolk County, NY
    Year, Model & Trim Level:
    2002 limited v8
    you need to call the hulk over...biggest b**** getting that thing out long screw driver will work or brute strength
     
  7. mattd08

    mattd08 Member

    Joined:
    January 19, 2011
    Messages:
    85
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Bristol, Va
    Year, Model & Trim Level:
    02 XLT
    Yeah haha I have never seen something be that hard to get out of a vehicle. Im trying not to break anything in the process of pulling and prying it out. Thanks for the help though.
     

Share This Page







We Support Our Troops!