Dismiss Notice



Register Today It's free! This box will disappear once registered!

New To Me Sport Trac Questions

Discussion in '2001-2005 Explorer Sport Trac' started by LBJ75, July 25, 2011.

^^Searches ExplorerForum.com^^





  1. LBJ75

    LBJ75 New Member

    Joined:
    February 19, 2011
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Lodi, Ca
    Year, Model & Trim Level:
    1991 Ford Explorer
    Hi guys,
    I recently purchased a 2001 Sport Trac and have some questions.

    1. There is a 12v connector in the bed, I am assuming that is an inverter? If so where can I get the adapter plug?

    2. I have the keypad on the drivers door, but no code. Is there a quick, cheap way to get the original code or reprogram?

    3. Also, I am looking for some stock parts and was wondering if there is a good site, besides the want ads here and E-bay, to check for parts?

    Thanks
     
  2. Support EF

    Special! - 2 Year Elite membership now through July 24 $20!

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.



  3. MidnightRebel07

    MidnightRebel07 Elite Explorer

    Joined:
    March 6, 2010
    Messages:
    5,542
    Likes Received:
    7
    Trophy Points:
    58
    City, State:
    Pittsburgh, Pa.
    Year, Model & Trim Level:
    2003 Explorer Sport Trac
    The power outlet in the bed is a regular 12v cigarette style power outlet.

    Do a quick search in this sestion or in the '95-01 Stock Explorer section for the write-up on the door keypad reprogram.

    As for the stock replacement parts, what parts are you looking for?

    By the way, welcome to the site!!!!
     
  4. MidnightRebel07

    MidnightRebel07 Elite Explorer

    Joined:
    March 6, 2010
    Messages:
    5,542
    Likes Received:
    7
    Trophy Points:
    58
    City, State:
    Pittsburgh, Pa.
    Year, Model & Trim Level:
    2003 Explorer Sport Trac
    Check out mysporttrac.com for parts and more helpful info, other members from here including myself are over there too.
     
  5. LBJ75

    LBJ75 New Member

    Joined:
    February 19, 2011
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Lodi, Ca
    Year, Model & Trim Level:
    1991 Ford Explorer
    Thanks again. I will be needing more info I am sure!
     
  6. LBJ75

    LBJ75 New Member

    Joined:
    February 19, 2011
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Lodi, Ca
    Year, Model & Trim Level:
    1991 Ford Explorer
    I found a thread in the 95-01 Explorer section on reprogramming the keypad, but it doesn't tell the location of the module I need to find in the Sport Trac. Any ideas?
     
  7. MidnightRebel07

    MidnightRebel07 Elite Explorer

    Joined:
    March 6, 2010
    Messages:
    5,542
    Likes Received:
    7
    Trophy Points:
    58
    City, State:
    Pittsburgh, Pa.
    Year, Model & Trim Level:
    2003 Explorer Sport Trac
    I'm not sure about this one so I contacted ncranchero, he's the man to talk to.
     
  8. 600remguy

    600remguy Active Member

    Joined:
    February 15, 2010
    Messages:
    165
    Likes Received:
    0
    Trophy Points:
    16
    City, State:
    SW Ontario
    Year, Model & Trim Level:
    '04 SportTrac XLT 4Paw
    If it is a Job 1, its behind the centre of the rear seat. If its a Job 2, its under the defroster vent and the passenger side. Pop up the defroster panel and peek thru the windshield with a strong flashlight and look for a white modual about the size of a pack of smokes. The 5 digit code will be slightly larger the other data. Best to do when its dark outside.
     
  9. ncranchero

    ncranchero Co-moderator Staff Member Moderator Elite Explorer

    Joined:
    August 14, 2004
    Messages:
    3,737
    Likes Received:
    6
    Trophy Points:
    48
    City, State:
    Denver,NC
    Year, Model & Trim Level:
    '94 F150 4x4 SWB 4.9L
    The door pad code is on top of the central security module, which is behind the passenger side air bag on a Job 2 2001 and on the back panel under the window on a Job 1 2001. Job 1 / Job 2 crossover date = June 24th, 2000 so you'll have to determine which you have from the date on the vehicle certification label on the door.
    This JOB 1 JOB 2 thread will also illustrate the underhood visual differences.

    THIS method is the easiest in locating the code on 2001 Job 2 and later models.
    Alternate to this is depowering the SRS and removing the air bag.
    [​IMG]
    [​IMG]
    [​IMG]
     
  10. interscope8

    interscope8 Well-Known Member

    Joined:
    April 22, 2010
    Messages:
    1,305
    Likes Received:
    0
    Trophy Points:
    46
    City, State:
    Purdue University
    Year, Model & Trim Level:
    2001 Sport Trac 4x4
    I was gunna say my security code was n my Trac's manual...

    Welcome to the forum!
     
  11. JohnnyO

    JohnnyO Moderator Emeritus

    Joined:
    January 4, 2005
    Messages:
    1,833
    Likes Received:
    2
    Trophy Points:
    48
    City, State:
    Pittsburgh, PA
    Year, Model & Trim Level:
    '08 Sport Trac
    The 12v plug in the bed is not an inverter but you can plug an inverter into it.
     

Share This Page







We Support Our Troops!