Dismiss Notice



Register Today It's free! This box will disappear once registered!

No ac, belive its a power..

Discussion in 'Under the Hood' started by sknight88, January 1, 2005.

^^Searches ExplorerForum.com^^
  1. sknight88

    sknight88 New Member

    Joined:
    August 22, 2004
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Spring Hill Florida
    Year, Model & Trim Level:
    1994 Xlt
    issue, not getting any voltage reading off of the clip that goes to the compressor. Anyone have an idea what the voltage should be, or better yet, check it on theres? Light comes on when I push the ac button, but compressor doesnt even cycle. Can I run 12 volts from the battery just to check it out? Tried all the fuses, both under dahs and under hood, all good, even swapped out the relay. 1994 4x4 , thanks
     
  2. Support EF

    Join the Elite Explorers for $20

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.



  3. Doug904

    Doug904 Sponsor

    Joined:
    March 30, 2001
    Messages:
    535
    Likes Received:
    0
    Trophy Points:
    0
    City, State:
    Jasper, Alabama
    Year, Model & Trim Level:
    2005 Roush GT
    If your frreon level is low from a leak then the low pressure switch on the side of the accumulator won't activate the compressor, it's the only thing before the compresssor in the circuit. Unplug the switch and jump across it with a small peice of wire or gem clip and if the compressor comes on then you either have a faulty switch or low freon level.

    Later Doug.
     






We Support Our Troops!