No power to turn signal switch

[Ronsway]

I installed new multifunction switch and new connector plug.
Wipers function properly, but I have no signal,brake or hazard lights.
I find no hot wire coming to the turn signal switch, no voltage on any wire whether key is on or off. Please help.

 

[koda2000]

I installed new multifunction switch and new connector plug.
Wipers function properly, but I have no signal,brake or hazard lights.
I find no hot wire coming to the turn signal switch, no voltage on any wire whether key is on or off. Please help.

What often happens is that with tilt wheel, the wires going to the MFS can break or pull loose from the electrical connector on the MFS. Check this.