anotherjoe
New Member
- Joined
- May 9, 2010
- Messages
- 3
- Reaction score
- 0
- Year, Model & Trim Level
- 1998 XLT
I'm trying to verify that I'm plugging the correct sensors into their respective plugs in the harness. I removed the old sensors, was distracted, and got back to working on replacing the new ones 3 hours later....couldn't remember which plug the left/right one goes in.
I looked up the wiring diagram at autozone, but it refers to the sensors as 1-4, not front left, or bank1-1, or whatever. I'm not sure which is 1, which is 2....you get the idea.
The harness for the rear sensors has a lead which is longer than the other, is that the left or right one?
This is on a 1998 Explorer 4.0 SOHC, w/ auto trans and 2WD.
I looked up the wiring diagram at autozone, but it refers to the sensors as 1-4, not front left, or bank1-1, or whatever. I'm not sure which is 1, which is 2....you get the idea.
The harness for the rear sensors has a lead which is longer than the other, is that the left or right one?
This is on a 1998 Explorer 4.0 SOHC, w/ auto trans and 2WD.