Wills05xlt4x4
Elite Explorer
- Joined
- March 20, 2011
- Messages
- 899
- Reaction score
- 2
- City, State
- Ashland Va
- Year, Model & Trim Level
- 2005 Xlt 4x4
ok so i have two taurus e-fans first question is the connector to the fan only has two pins but the fan has three on it( assuming for hi-lo)
SETUP---im thinking one pushing in the giant space and one on the bottom pulling...
does this sound like a good setup? im thinking itll be plenty of cfm but would like hi-lo if its just a different connector.
also I am wondering what would be the best fan control for the dual fan possibly dual speed setup..
fan is a 8c607-bd (from a 97 taurus dohc 3.0 w/104k)
should i worry about not having a shroud since the taurus fans dont have a shroud or will this affect cooling much...
THANKS IN ADVANCE GUYS!!!!
SETUP---im thinking one pushing in the giant space and one on the bottom pulling...
does this sound like a good setup? im thinking itll be plenty of cfm but would like hi-lo if its just a different connector.
also I am wondering what would be the best fan control for the dual fan possibly dual speed setup..
fan is a 8c607-bd (from a 97 taurus dohc 3.0 w/104k)
should i worry about not having a shroud since the taurus fans dont have a shroud or will this affect cooling much...
THANKS IN ADVANCE GUYS!!!!
