Afrojoe1449
Active Member
- Joined
- October 16, 2015
- Messages
- 77
- Reaction score
- 38
- City, State
- Ringgold, Georgia
- Year, Model & Trim Level
- 1998 Ford Explorer XL 4WD
Yep. Boomin has it right. I believe it's called
(Smittybilt 76721 SRC Front Bumper). But the previous owners cut the tubing off at the edge of the triangle portion so it's narrower. It could easily be welded in place. I don't have a welder at home yet, but could get brackets made at work so I went that route. I plan to cut the frame back a little further after I do my body lift.
Edit* I did not cut 5 inches off my frame. I cut the welds that hold the bumper horns off and after some grinding slid it over that. So in my photos that's about as far forward as you could put the bumper without building outward.
(Smittybilt 76721 SRC Front Bumper). But the previous owners cut the tubing off at the edge of the triangle portion so it's narrower. It could easily be welded in place. I don't have a welder at home yet, but could get brackets made at work so I went that route. I plan to cut the frame back a little further after I do my body lift.
Edit* I did not cut 5 inches off my frame. I cut the welds that hold the bumper horns off and after some grinding slid it over that. So in my photos that's about as far forward as you could put the bumper without building outward.
