torque on water pump bolts 4.0 sohc?

[biggiesize]

Gonna put a new fan clutch and water pump on this weekend and I cant find the torque specs on the water pump bolts anywhere.Anybody got that info handy?Thanks.

 

[2000StreetRod]

V6 torque spec

My Haynes manual specifies 72 to 108 in-lbs for the V6 water pump bolts and 14 to 18 ft-lbs for the water pump pulley bolts.

 

[biggiesize]

Thanks.I really appreciate the info.

 

[Johnny Reeves]

I need the torque settings for the thermostat housing, intake manifold, water pump, and fan for 9o ford 4.0 sohc

 

[2000StreetRod]

Solved - SOHC V6 Torque Specifications

 

[koda2000]

I would have guessed about 9-10 foot pounds in the W/P bolts and 15 'ish on the pulley bolts (pretty close, but I don't bother with a torque wrench for something like that (55+ years of wrenching experience). As far as the fan clutch nut, I tighten it by hand, put the special wrench on it while holding the pulley and give it a tap or two with my 5lb hammer. The way the pulley turns should prevent the nut from loosening. I've never had one come loose.