1. Holiday Special! - 2 for 1 Elite Explorer sale!

    Right now you can purchase an Elite Explorer membership for $20 and receive a two year membership!

    Click Here to start your membership and get rid of the ads!

    Dismiss Notice
Dismiss Notice



Register Today It's free! This box and some ads will disappear once registered!

What's this sound?

Discussion in 'Stock 2002 - 2005 Explorers' started by RickM, August 13, 2012.

^^Searches ExplorerForum.com^^





  1. RickM

    RickM Active Member

    Joined:
    March 1, 2005
    Messages:
    375
    Likes Received:
    0
    Trophy Points:
    0
    Year, Model & Trim Level:
    '02 Explorer 4.6 XLT 4x4
    Hi all,

    I asked this question before and in an attempt to address and was told the sound was a noisy torque converter. However, a few people told me it wasn't so.

    So..... I've recorded the sound and uploaded to FileDen. This noise started with my '02 not long after new...maybe a year or so.....it would come in and out....now it's pretty constant. It comes from where I think the Flywheel is located and kind of sounds like a pulsing / rushing (water) sound. It comes in and out. I placed my laptop under the Exp but it may be too close to get the distinctive sound. It's a bit loud and sounds more like a raspy rattle.

    If anyone can take a listen and give feedback I'd appreciate. I may try again from a bit further...it may be clearer.


    http://www.fileden.com/files/2012/8/13/3336574/exp sound.wma
     
  2. Support EF

    Elite Explorer 2 for 1 Sale! $20 for 2 years!

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.



  3. 94Eddie

    94Eddie Active Member

    Joined:
    September 18, 2003
    Messages:
    341
    Likes Received:
    3
    Trophy Points:
    18
    Year, Model & Trim Level:
    2010 Mountaineer Premier
    It is hard for me to tell from that clip. If the noise disappears when the transmission shifts into overdrive then it is probably the torque convertor.
     
  4. RickM

    RickM Active Member

    Joined:
    March 1, 2005
    Messages:
    375
    Likes Received:
    0
    Trophy Points:
    0
    Year, Model & Trim Level:
    '02 Explorer 4.6 XLT 4x4
    Eddie, Thanks for the reply. I'll try to get a better sample and check if it happens when going into over drive.

    Is there any other way to test the torque converter?
     
  5. Exproblems

    Exproblems Well-Known Member

    Joined:
    April 17, 2011
    Messages:
    1,687
    Likes Received:
    6
    Trophy Points:
    48
    City, State:
    Orchard Park, N.Y.
    Year, Model & Trim Level:
    '05 Explorer XLT 4.0L

    I listened to your audio and could hear it well(new PC), but it doesn't sound anything like the bad torque converter my EX had right after I bought it last year, Jan 2001. It was a cold winter here then and on a cold start up, the torque converter whined loudly. It sounded like a whiney power steering noise you could hear right thru the floor boards by the tranny/engine connection. Your sound seems more like something rattling around to me, totally different than what mine sounded like. BTW, the flywheel and torque converter are located underneath the Bell Housing of the tranny, where it bolts up to the engine. On older vehicles, they had a removable cover plate on the bottom of the bell hosuing so you could visually inspect the flywheel and torque converter area, but not anymore. Good luck with the diagnosis.
     
  6. RickM

    RickM Active Member

    Joined:
    March 1, 2005
    Messages:
    375
    Likes Received:
    0
    Trophy Points:
    0
    Year, Model & Trim Level:
    '02 Explorer 4.6 XLT 4x4
    I will take a pic of where the sound is loudest. I sounds like something making contact with the flywheel in an on and off, almost pulsing, manner.

    As mentioned, I will rerecord from a bit further away so the sound is more distinct.

    Thanks
     
  7. HCCA 250

    HCCA 250 Active Member

    Joined:
    November 7, 2009
    Messages:
    134
    Likes Received:
    0
    Trophy Points:
    16
    City, State:
    IL
    Year, Model & Trim Level:
    2002 Eddie Bauer
    Isolate converter noise The 5R55N/W/S units have a TCC piston that floats
    through the cover. In Figure 10 you can see the load springs
    and the mating tooth patterns. Frequently and even with new
    converters, excess interference and lack of spring load results
    in a rattle, prevalent in neutral. This rattle is very difficult to
    isolate and can be related to the flex plate, the inspection
    cover, the camshaft sensor, the line control valve (review
    above) or the converter piston.
    These units require a flex plate alignment tool and during that
    process the OEM paint/balance marks should be positioned
    next to each other. Most converter rebuilders can supply the
    tool and rebuild your converter with an updated piston
    (Sonnax p/n FD-DA-17PB), to eliminate a TCC rattle.
    To isolate the noise prior to removal, use the line control
    valve test and alternate that test with a TCC command test.
    This TCC command can be performed with a shift box or by
    grounding the TCC solenoid pin 14. Verify you’re on the
    correct wire or you have just added time to your repairs!
     

Share This Page







We Support Our Troops!