1. Tip...
    If you hold most smartphones sideways
    you can bring up a more full featured version of the forum.
    Dismiss Notice
Dismiss Notice



Register Today It's free! This box will disappear once registered!

Will this tube bumper fit?

Discussion in 'Stock 1991 - 1994 Explorers' started by Harder93, July 12, 2011.

^^Searches ExplorerForum.com^^





  1. Harder93

    Harder93 Member

    Joined:
    April 25, 2011
    Messages:
    86
    Likes Received:
    0
    Trophy Points:
    6
    City, State:
    Buckley, WA
    Year, Model & Trim Level:
    '93 XLT 4x4
    I have a chance to pick up the front and rear tube bumpers off a jeep wrangler for 60 bucks just wondering if they will fit on my 93 explorer

    explorers are 70" wide
    wranglers are 66" wide

    Im mostly looking at the frame widths if it will just bolt up with a few new holes

    and im mostly just wanting the rear bumper
     
  2. Support EF

    Join the Elite Explorers for $20

    Explorer Forum has probably saved you that much already, and will continue to save you money as you learn how to diagnose fix problems yourself and learn which modifications work without having to experiment on your own. Elite Explorer members see practically no ads, can add their own profile photo, upload photo attachments in all forums, and Media Gallery, create more private Conversations, and more. Join Today. Your support is greatly appreciated.


  3. Anime

    Anime EF YEAH!! Elite Explorer

    Joined:
    November 6, 2000
    Messages:
    5,445
    Media:
    9
    Albums:
    1
    Likes Received:
    23
    Trophy Points:
    48
    Year, Model & Trim Level:
    2018 EX Sport Concept
    If you have a grinder and welder, they can be modified to fit.

    They probably won't bolt up securely otherwise though.
     
  4. gmanpaint

    gmanpaint It's Always Something! Staff Member Moderator Elite Explorer

    Joined:
    August 1, 2008
    Messages:
    10,128
    Likes Received:
    873
    Trophy Points:
    143
    City, State:
    MO MO
    Year, Model & Trim Level:
    Modified 95 XLT
    Frame rails widths are whats most important. There is only a little bit of difference in the two vehicles frame widths. You can cut the ends off at the turn (if there is one), or cut a notch, heat em up, & bend the ends to make them wider, and weld the notch. Make some boxed caps for the frame rails, and bolt the bumpers to the caps thru the frame rails.

    Anime is right. There is other ways, I just threw one example out there. :)
     

Share This Page







We Support Our Troops!