Fix for 60 side of rear seat not folding on a 2 latch seat.
You have to remove the 60 portion of the seat. 4 bolts are 19/32 and 2 bolts are 3/4. Take the seat completely out and stand behind it. Turn the seat so you can easily see the latch with the cable. Use needle nose pliers and pull the cable out of the notch on the plastic wheel. Remove the wheel(it just slides off). The wheel has 2 notches. Cut a new notch between the 2 existing notches. Re-install wheel and put the cable in the new notch you cut. My notch was not so pretty ( you should use a dremel tool) but I expoxied it and put instant steel on it too. It works just fine now. Over time the cable stretches and won't let the bottom part of the seat release. I would have posted pics but I don't know how. This is my first post so move it where it needs to go.
You have to remove the 60 portion of the seat. 4 bolts are 19/32 and 2 bolts are 3/4. Take the seat completely out and stand behind it. Turn the seat so you can easily see the latch with the cable. Use needle nose pliers and pull the cable out of the notch on the plastic wheel. Remove the wheel(it just slides off). The wheel has 2 notches. Cut a new notch between the 2 existing notches. Re-install wheel and put the cable in the new notch you cut. My notch was not so pretty ( you should use a dremel tool) but I expoxied it and put instant steel on it too. It works just fine now. Over time the cable stretches and won't let the bottom part of the seat release. I would have posted pics but I don't know how. This is my first post so move it where it needs to go.
