The #1 Ford Explorer enthusiast resource for over 25 years!
Performance upgrades, maintenance, modifications and problem solving. Covering the Explorer, ST, Ecoboost, Lincoln Aviator, Sport Trac, Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Aerostar.
Replacement rear diff fill plug! Where do you buy a new one for 95?
Are all the rear diff Fill plug the same for all the years?
Are all the rear diff Fill plug the same for all the makes and model fords?
I just replaced the oil pressure switch for the gauge. I used motorcraft SW-2220 (E9SZ-9278A). Torque 12 -18 ft/#(FSM).
I used a oil pressure switch socket(from autozone).
What I checked before replacement, Is how it worked. Result are: if I grounded the wire the gauge showed 1/2 way on the...
I am repairing some steel tubing and I am using flare fitting and brass union (coupling) too joint the lines.
I purchase pre-fab brake tube with flare fitting that are steel and also the mating brass union.
Problem I am having the steel fitting are leaking at the connection.
Has anyone else...
Is there a cover below the driver rear quarter panel fuel filler area? my 95 ex is rusted out. What i found was the filler neck is in a plastic dugout, which is inside a half dome. The half dome is rusted thru. the area by the filler neck rusted thru and the wheel well. If there was a cover or...
I've got an odd Coolant leak on a 95 4.0L OHV. My 'ex is leaking on the oil filter side of the engine (above filter), Below the heater valve, hoses in and out heater core. The heater valve and hoses are dry. I'm having a problem pin pointing the leak of the engine. I cant where it coming from...
1995 2nd gen 4x4 low stop working. It worked, than did not work. Now its not working. I replaced the GEM module, selector switch, and transfer case shift motor. No change. Still have the issue. From this forum, someone states, there is a additional relay in the dash, that commands the GEM...
What is everyone doing for rack and pinion? I have a 1995 explorer xlt4 door. Do maintenance item today a inspected the boot on tie rod, and there is fluid inside. This my third replacement. Replaced it 3 years ago or 3k mile ago and its leaking ago.
Change my transmission fluid the other day with MERCON V. On the Val bottle there was a tech support number so I call it and ask the tech support, can MERCON V be used in transfer case He answer YES, and also MAXLIFE.
Today’s Date 12-11-2019
1993 to 1995 ford explorer xlt 4 door Code X (Cam Position Sensor) Cam Synchronizer Replacement.
On My 1995 ford Explorer 4.0L V6 OVH pushrod engine;I used Cardone A1 84-S2605New Synchronizer.
1. Rockauto Cardone 84-S2605 (Ford Part # 12K073)
2. Ebay: CID...