Search results | Ford Explorer - Ford Ranger Forums - Serious Explorations
  • Register Today It's free!

Search results

  1. M

    3rd gen pic's

    yeap, these are OEM F150 tow hooks / F85A-17A954-0A 2000 FORD EXPEDITION F150 PICKUP TOW HOOKS
  2. M

    3rd gen pic's

    This is my 3 rd Gen. spacer lift 2.25" front and 1.75" rear / Body lift 3" /285 75 R17 Cooper Discoverer ST
  3. M

    Off road front bumper for the 3rd generation

    I like the design I found in 2005 for the Toyota and here is my old bumper from 2nd gen
  4. M

    Off road front bumper for the 3rd generation

    I wonder if anyone made any awesome version of the off road front bumper for the 3rd generation. I am looking for a project as in the picture for 2ndgen
  5. M

    DIY 3” body lift

    when loosening the frame bolts, it is worth to use the induction screw heater for all bolts and an impact wrench like MILWAUKEE – it reduces the disassembly time and makes the work more easier for sure Body lift 3 inch and and 4,7 inch 2nd generation done
  6. M

    DIY 3” body lift

    short update based on all collected information, I did prototypes material Steel 40HM (1.7225) One without a mounting hole because it is a weak point and is unnecessary for the 3rd Generation in my opinion. For sure in my 2004 Explorer there is no such need. The second with mounting hole...
  7. M

    Ford Explorer 2002-2005 front skid plate

    Installation done Skid plate - stainless 4301 - 3.0 mm installation kit: 4 x M12x40 4 x spring washer Braket 2 x with M12 Nut - 1,5 mm Loctite 4xM10 x25 4 x flat washer Loctite if necessary add 2 x tow hooks Ford F85A-17A954-0A 2000 FORD EXPEDITION F150 PICKUP TOW HOOKS 2 x Tow Hook...
  8. M

    DIY 3” body lift

    I wonder if anyone can confirm the dimensions of steering intermediate shaft / universal joint for Ford Explorer III to be roughly .5” wide and roughly .64” tall. But what are the exact dimensions ?
  9. M

    Ford Explorer 2002-2005 front skid plate

    after reviewing and first installation the whole concept has been changed - mounting bracket at tow hooks need to be adjusted for better assembly
  10. M

    Ford Explorer 2002-2005 front skid plate

    First prototype dome 1.4301 s/s thickness 3.0 mm
  11. M

    Ford Explorer 2002-2005 front skid plate

    update, drawing will follow after prototype. Some dimensions may be slightly different from the final version dimensions are in [ cm / mm ] /metric
  12. M

    DIY 3” body lift

    additionally you can add also front skid plate https://www.explorerforum.com/forums/threads/ford-explorer-2002-2005-front-skid-plate.487366/
  13. M

    Ford Explorer 2002-2005 front skid plate

    Initial dimensions of the mockup Ford Explorer front skid plate base on factory Ford Ranger front skid plate M-5018-R All dimensions are in [ cm ] /metric / angle ca.160 degrees Mounting with a bracket to front tow hook bolts and tow hook nut plate W712330S441 / W706973-S441n
  14. M

    5R55S Transmission Fluid Temperature Gauge

    I appreciate your help, as I understood the adapter has a - 1/8-27 NPT port and M10 x 1.0 thread
  15. M

    5R55S Transmission Fluid Temperature Gauge

    Temperature Auto Gauge sensor has a - 1/8-27 NPT port What thread does the extension have to transmission?
  16. M

    5R55S Transmission Fluid Temperature Gauge

    Transmission Fluid Temperature I wonder does anyone have installed a sender unit for transmission temperature gauge at pressure control tap?
  17. M

    DIY 3” body lift

    They are the same as ZON3396 which I bought from Fat Bob's Garage zon3396 - Available Now in the Fat Bob's Garage Online Store any news regarding steering extension?
  18. M

    DIY 3” body lift

    if you create sketches I can create drawings and dxf for laser, but I need dimensions in (mm) I bought screws listed below to prepare set for body lift 3 " ZON3396 - Bulk Body Lift Block 3" Tall x 3" Wide / from Fat Bob's Garage zon3396 - Available Now in the Fat Bob's Garage Online...
  19. M

    Rear bumper like Ford raptor

    I did that to my old Explorer, requires some adjustment during assembly
  20. M

    Rear bumper like Ford raptor

    Ford Explorer 1995 rear bumper like Ford Raptor
  21. M

    Explorer Uniball upper arm for Lift

    Thx Dude , That's the other thing I was thinking about.
  22. M

    Explorer Uniball upper arm for Lift

    I wonder if anyone has drawings, mockup or model for upper control arm? I’m looking for something similar to uniball upper arm 02-05 Explorer uniball upper arms Delivery costs, customs and VAT to Poland are more expensive or very similar than the purchase price from BTF
  23. M

    Spacer lift rear 1,75 “ + front 2,25” Drawings

    dxf file are only ready for laser cutting w/o dimension, e-mail address priv please
  24. M

    Spacer lift rear 1,75 “ + front 2,25” Drawings

    I can't add dxf files, the forum does not provide this option for my user
  25. M

    Spacer lift rear 1,75 “ + front 2,25” Drawings

    Attached drawings for those who want to do it themselves - Ford Explorer 2004 Serious Explorations Explorer Forum Ford Explorer and Ranger Enthusiasts
Top