Search results | Ford Explorer - Ford Ranger Forums - Serious Explorations
  • Register Today It's free!

Search results

  1. S

    T case makes sounds when turning shaft

    hey, Ive got my transfer case removed and was turning the shafts to check for problems and heard a loud ball bearing clank sound when i move the shaft quickly one way or the other. Doesnt sound good to me. Anyone heard something similar? sounds kinda like shaking a spray paint can. Ive...
  2. S

    How to: Ford 4R55E Transmission removal & installation instructions.

    working on taking my tranny out today. got to step 8 with the cat converter.....it doesnt seem to want to come out....getting stuck on hanger and crossmember. can i just leave it there until im ready to lower the crossmember? step 9 says something about locater.....what locater? also...
  3. S

    no OD, no reverse 95 ex 4.0 4x4

    If you look here there is a good guide on the pressure test. http://www.explorerforum.com/forums/showthread.php?t=117998 I finished my test today. Idle Fast I WOT P 110 115 120 R 160-175 195 over 250...my gauge only goes to 200 N 105...
  4. S

    no OD, no reverse 95 ex 4.0 4x4

    I dont have a trans manual yet so im just going off of information here on the website but according to the band adjustment stickied thread there are three bands overdrive, intermediate, low/reverse. Only OD and intermediate are adjustable. I was able to torque the two adjustable ones without...
  5. S

    My 5R55E transmission is leaking transmission fluid, and I have no reverse gear.

    Gotta love that JB weld, I used some in my pan when i put a drain plug in. Be sure to let it cure for a long time. Hope it works for you. Michael
  6. S

    no OD, no reverse 95 ex 4.0 4x4

    Got my pressure guage on tonight. Got my idle readings and will get fast idle and wot tommorrow. Park 110 Reverse 160-175 Neutral 105 0verDrive 55-65 Second 45-50 First 50 To summarize so far Problem: OD and R slip so much i can barely move. once OD button is off i have forward...
  7. S

    transmission from 2wd into 4wd?

    Hi, I have a 95 explorer 4.0 v6 4wd. My transmission is having problems. If i find a same model year 2wd v6 with a good transmission could i swap it into my 4wd vehicle and still have 4wd? thanks michael
  8. S

    no OD, no reverse 95 ex 4.0 4x4

    sorry to hear that man. havent heard of that before now. can you do anything about that besides replace the case?
  9. S

    no OD, no reverse 95 ex 4.0 4x4

    108-126 in/lb for a 5r55e i assumed mine was the same for 4r55e torque the bolt furthest from the sides first, then one in corner diagonal from first, third and fourth is hard to describe. I got a pic in a pdf file from a link on this site but couldnt refind the link. I dont think my...
  10. S

    no OD, no reverse 95 ex 4.0 4x4

    solenoids looked ok. i did replace the EPC the first time i was in there. I checked the ohms on the solenoids and the values were ok. The bracket appears ok. ill try to eliminate those troubleshooting steps one by one on that list. First it says loss of reverse and 3rd or 4th may be...
  11. S

    no OD, no reverse 95 ex 4.0 4x4

    The Rev servo did not appear chipped or broken. yes new o rings. Did not notice oval bore. Did look in there for scratches or marring of the sides and saw none. Spring pressure seemed to be working on servo. Yes torqued the band adjustments according to the sticky thread. thanks
  12. S

    no OD, no reverse 95 ex 4.0 4x4

    Been awhile since ive posted. Havent worked on the SUV until recently. Still only goes forward with OD button off and reverse minimally when i floor it. Still no trash inside transmission. I have changed gaskets on valve body changed internal wire harness changed reverse servo gasket...
  13. S

    how to remove internal wire harness?

    never mind, finally found a mirror to use and was able to see a horse shoe clip on the outside of the case side of the wire harness that you pop out. Couldnt see it without it. Anyways, off to get my new harness.
  14. S

    how to remove internal wire harness?

    hi, On the internal wire harness on 4r55e do you just knock it down through the case into the pan area or is there a special way to do it? thanks
  15. S

    800700tran.com too good to be true?

    They have an F rating with the BBB. I did not find this out until after I ordered from them. Their phone voice mailbox is full and phone is not answered. My part has not arrived as of yet. :( I ordered a wire harness through them about a week and a half ago. So my part may still be coming...
  16. S

    no OD, no reverse 95 ex 4.0 4x4

    Jack, When i turn off OD and leave the gear selector in D/OD mine acts normally. Shifts through all gears normal but no last OD gear. Sounds like you dont get 1st and R? I dont get OD and R. I will check reverse engagement after going to 2nd or 1st like you suggest. Also Band...
  17. S

    no OD, no reverse 95 ex 4.0 4x4

    To summarize so far Problem: OD and R slip so much i can barely move. once OD button is off i have forward movement up to 3rd. My OD light does not blink and i have not been able to get a code. Troubleshooting so far: Dropped transmission pan...no metal parts and clean fluid. I replaced...
Top