Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

  • Explorer Forum license plate frames are available 2 for $12, or 4 for $17. For photos and more details CLICK HERE

Search results

  1. A

    looking for tips of scrapping out

    Will do. Thanks for replying guys. Going to tear into it tomorrow.
  2. A

    looking for tips of scrapping out

    Hi all, the motor went out on my '92. at 330,000 miles. head gasket blew and she overheated bad, something came loose inside. Burned a lot of oil before it and was used as a work truck the last ten years, and is in terrible shape, shot suspention and whatnot. I have a 91 in better shape, so I...
  3. A

    92 brake problem

    I forgot to mention that I also replaced the front brake hoses, as one blew and that is the reason I started this complete brake system overhaul in the first place. Is anyone familiar with the RABS control valve. Here is a picture...
  4. A

    92 brake problem

    so if I can positively rule out a leak in the system, and I know it is well bled, it would have to be the master cylinder, right? or is there something else it could be? If a booster goes bad you have a hard pedal, I was told, if so it cannot be the booster and I can't think of anything else...
  5. A

    92 brake problem

    It has RABS. my manual indicates that I only need to worry about the special tool and bleeding on the 4 wheel ABS in the '93 and after models. Is it right? can I bleed that little porportioning valve on the chassis, and if so in which spot on the wheel to wheel sequence? Thanks, Damon
  6. A

    92 brake problem

    I had a soft brake pedal forever and the system was generally worn out so I replaced the: pads shoes resurfaced drums and rotors hardware calipers wheel cylinders master cylinder The master cylinder was bench bled and the system was bled by bleeding the farthest wheel from the master...
  7. A

    Cooling system maint.

    for the novice like me, I just found out the hard way that it is the temp sending unit, not the coolant temp sensor. I just bought the wrong one. Ah well. Damon
  8. A

    Hood stuck, help

    fixed Thank you so much. It was the latch. I got a friend to beat on it while I pulled and presto, intant fix. After lubing the latch it works fine. Now I just have to remember to keep it lubed. Thanks, Damon
  9. A

    Hood stuck, help

    My hood is stuck on My '92 X. How do I fix it? There is resistance when I pull the lever but no disengagement. I've tapped, pushed and pulled but what do I do now? Thanks, Damon
  10. A

    Cooling system maint.

    You guys are the best! Who could ask for more? Just one question. I read and see here that the 1st gens have two temprature sensors. One for the guage and one for the computer. How do I know I am buying the right one. Is it the coolant temprature sensor? Thanks, Damon
  11. A

    Cooling system maint.

    Hello, I have a '92 X with the 6 cyl that has 233,000 miles. This is the best truck/vehicle that I have ever owned. It runs like a champ (knocking on my wooden desk), I drive it on 500 mile round trips twice a month. I was sour on fords because my first car was a topaz, it was the biggest...
  12. A

    4x4 does not work

    Hello,I am a relatively new explorer owner. I have a '92 explorer v6 with 207,000 miles that runs like a champ.the 4x4 does not work.nothing happens at all when I press the button. The previous owner informed me that the first to go was the low range,would not engage.Then the regular made a...
Back
Top