Search results

Can I replace my cam in my 98 5.0 with any of these

So how do I get grease in the passenger side upper ball joint? I started to do them last night. I removed the bolt out of the rear bushing on the right side and it shifted to the point I froze. That's when I looked everything over again and got on here and made the post. I ended up putting the...

I'm replacing my front lower control arm bushings. Do I need to remove my torsion bar?

P1309...says my pcm disabled the misfire monitor bc it is running too rough.. It gives me this code Everytime I hook up the OBD2.. I think I need a new pcm

The 02 sensors are not new but I've also cut off my back cats band hollowed out the fronts. So it's pretty loud. Kinda of ridiculously loud bc I got about 9 inches of pipe after the hollowed cats the there are 2 88522 cherry bomb glass packs. I got flanges at the end by the back passenger door...

Yalrigjt I'll be sure and do it in the order you mentioned. The sync was oem, the cam sensor was not. Should I replace the cam sensor with motorcraft? Not a big deal, I just have to order it and wait for it to come in. Yes I read up on the man hrs for the job and it says 4 to 6 if everything...

Ok thank you

Thank y'all This has been driving me out of mind. Don't have a programmer for the pcm. I'm guessing I have to order one online?

I have 298k miles on it. I've replaced all the sensors, synchronizer, purge valve, valve stem seals, thermostat. Haven't had to replace any pumps You name it I've probably replaced it I noticed this morning that I had some antifreeze on top of the timing cover next to the thermostat housing I...

I'm not tuning or flashing the pcm. I'm not touching it.

That's what I'm saying I've never did timing before. I'm replacing the timing chain and all the gaskets but once I put the harmonic balancer in I don't know what to do... Is there a certain way I should put the harmonic balancer in? Once everything is put back together what do I need to look for?

I've set my timing twice. I installed a brand new harmonic balancer but when my mechanic friend set the timing and we cranked it over it started but was making a loud hissing noise, sounded like a tire losing air We set it again about 12 14 degrees and now it makes a faint popping noise from the...

You're welcome Mounty...anything to help bc I know the feeling

Youre welcome Mounty..glad you were able to find one.

Heck if I know Im go in to check my wheel bearing. Maybe I bought some defective ones.

Yea im at a dead end on this mf.. Axle wouldnt cause that noise right?

Yep..replaced those too and the yoke

Already changed the tires from front to back. Checked the rear end, if was good..changed the gear oil too

I have my old one (its not chinese) i took off my 5.0 with the tube Super clean no build up Ill mail it to you if you pay for shipping

When I turn to the left or driving straight I here grinding noise coming from the passenger side front end. No vibration felt I have brand new upper control arms with ball joints..lower ball joints.tie rod ends sway bar links and inner/outer wheel bearings. Had the noise before replacing all...

Havent replaced any injectors

I already replaced the valve stem seals valve cover gaskets When I took the valve covers off it was shocking smooth as glass. There was no build up at all..the head was smooth as glass. I took pictures? It wont let me posts those either. The fighf side had a little build up but not much. Back...

I found a 351 with 121000 miles on it but who knows it could more than that

It probably is just worn out I mean 294k is a lot for this thing