Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. A

    Overheating Saga Continues... * FIXED *

    Thanks for the reply, i went ahead and bought a new radiator this morning $66 dollars at one of our local places (Penny Pincher Auto). still need to install it but its hot outside here in phoenix...lol, hope it cures my overheating problem since everything i read on here points to the thermostat...
  2. A

    Overheating Saga Continues... * FIXED *

    i have this same problem going on but when i try to drain the radiator from the drain on the bottom nothing comes out.. if i stay off the freeway no problems but soon as im on it my truck heats up, i also have the dirty rusty water going on as soon as i change it rusty again.. Radiator?
  3. A

    How to: Clutch Switch Bypass

    good post helped me not miss a day of work.... Thanks
  4. A

    How to: Clutch Switch Bypass

    good post helped me not miss a day of work thanks....
  5. A

    '94 exp - problems removing EGR tube from EGR valve...help!

    EGR Valve Bypass Test Plug... thanks
  6. A

    '94 exp - problems removing EGR tube from EGR valve...help!

    blowing out of these 2 holes should that be happening?
  7. A

    Replacing freeze plugs

    this was this morning im about done with it, did the freeze plug and thermastat and changing all the hoses out.broke the heater valve trying to change out the hoses..
  8. A

    Replacing freeze plugs

    my new little problem...
  9. A

    Clutch Slave Cylinder Failure

    Hard Shifting My Clutch Slave Cylinder just went out and i was experiencing the same issues would a second gear grind on the down shift be related or should i have them looking for something else also.. Thanks all
  10. A

    1993 - 2001 Ford Explorer Clutch Slave Cylinder ( Exedy)

    Shop Price Got my truck at Firestone right now having the Clutch Slave Cylinder replaced 834 dollars Phoenix, Az..
  11. A

    Any help on how to install a new starter?

    Just did my starter not to bad layed under the driverside was able to get to both nut and bolt with no problems..was a 14mm socket though and a 17mm for the bottom bolt..
Back
Top