Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. X

    SOHC exhaust

    Have any of you with the SOHC put dual mfflers on the dual inlet pipes and ran duals all the way out? How did sound and power increases if any.
  2. X

    Intake concerns

    Have any of you experienced a loss in gas milage in your SOHC with an air intake installed?
  3. X

    Sway bar & endlink bushings

    my passsenger side end link just broke on me about a week ago. went to advance auto parts and got both sides for $25 and they are the polyurethane bushings and are way better than the stock ones. Mine was nothing like the stock ones it has the long bolt, 8 washers, 4 bushings, a metal sleeve...
  4. X

    What happened to my AC?

    the blend door wouldn't effect you because you got a first generatin xplorer. but any way they break away from the motor that turns them if i understand correctly. mine has done it i don't feel like spending $500-$1000 to fix it.
  5. X

    What happened to my AC?

    does it work on max if so it's probably that wonderful thing called a blend door.
  6. X

    i'm impressed

    after owning a 91' XLT with a manual tranny for 2 years, and being ok with the power it had. I got a 98' XLT with the 4.0 SOHC and was really impressed in the amount of power it had compared to the older one. My mom has a 2000 sport and i blow her away cause she's got the OHV which sucks...
  7. X

    what the heck is that

    being in the spot and the angle in which it operates it can't possibly help unless it's really tight.
  8. X

    what the heck is that

    i was under my explorer earlier today changing the fluid in the rear axle and noticed a third shock what the hell is that for. just axtra dampining or something else?
  9. X

    exhaust ?'s need help

    what is the most popular and best sounding dual in and single out muffler for the sohc 4.0? and what size are the pipes? any help would be great.
  10. X

    it's getting hot in here

    my wife just totaled my 1st gen this is how i ended up with the 98 but anyway you have to put the selector on max a/c to not let any outside air in. in your manual it actually tell you the same thing.
  11. X

    it's getting hot in here

    what am i looking into here as far as replacing the blender motor and how can i test it to make sure. where exactly is this motor at?
  12. X

    it's getting hot in here

    i have a 98 xlt and the heator select dial the one that you select the hot or cold setting doesn't seem to be working. what can cause this to do this? when i try to get the outside air in by the vent and the setting all the way in the cold it blows out hot air tlike the heater was on so in...
  13. X

    axle codes

    thanx that's what i was guessing. espeacially with the auto 4 wheel drive.
  14. X

    axle codes

    what about the front ifs are they open diffs or they the same as what your rear axle would be?
  15. X

    axle codes

    well i got the limited slip 3.73 that's alright. does any one know how well those limited slip rear ends hold up. the reason i ask is i had an s-15 jimmy with the government locker and it grenaded on me at about 120K miles. but that was a gmc not a ford.
  16. X

    axle codes

    does anyone know the axle codes for a 98'? I was looking in the manual and i don't see it like all the other fords i've owned.
  17. X

    oh no x is gone

    my 91, xplorer was totaled about a week ago. but the good thing is i am getting another one hopefully by the end of this week if the insurance would quit screwing with us. we are looking at a 98' XLT seems pretty nice. Any advice or experince with common problems on this year i should know...
  18. X

    back spacing

    thank you i tried searching and got i think 20 pages of results so i figured i would just ask real quick.
  19. X

    back spacing

    what back spacing and lug pattern are the stock rims on a 91' ex?
  20. X

    front locker

    i think i got it. so basicly aside from a few small things it will just unbolt. that's all i was wandering thank you for the help.
  21. X

    front locker

    on the first generation xplorers, how hard is it to get the differential off? do you have to remove the ttb or can you unbolt it from the front and drop it down like a ford 9 inch?
  22. X

    kkm vs. ifab

    so if looks are not the problem just performance than the kkm is better espeacialy for the $90 savings.
  23. X

    kkm vs. ifab

    i have a 91' xplorer with flowmaster cat-back and was wandering if the ifab intake kit is worth the extra $90 over the kkm or is it just personal prefrence?
  24. X

    t-5 tranny on xplorer

    so what i'm hearing is that the cost really don't justify the advantages of swapping to a t-5 over the M5R1. i didn't realize there were so many versions of the t-5. As for first gear that would be a killer for me with 31's and the 3.28 rearned or what ever it is i can't ever remember the ratio...
  25. X

    t-5 tranny on xplorer

    how would you think the t-5's ratios would work in a 4wd? and would this swap be worth it do you think? it sounds good to me but not real sure.
Back
Top