Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. C

    Programming a new remote on the Bosch Immobiliser system on European Vehicles

    Unfortunately I no longer have the car and some years have passed. I can tell you it didn't work for me the first tries either. I think it took me about 4 hours (and I didn't take out the horn) when I just kept trying the same thing over and over again. Since the code is ok the problem may be...
  2. C

    Running KOEO, KOER using a generic scantool (ELM327)

    PIDs Here is how I got to them: 1996-1999 Ford Service Manual DVD/96_99.iso Up until now I didn't have the time to work some more on this as just last night a fuse refused to blow and decided it liked better to melt (along with some wires inside the dash) and now my car is more or less...
  3. C

    Running KOEO, KOER using a generic scantool (ELM327)

    Monitoring the bus Hello dcorwin, Yep, I have seen your post. Unfortunatelly I do not have access to an NGS to do the tests. But your idea of monitoring the bus sounds nice. As soon as I'll have some free time I'll give it a go. I have just managed to get a hold of J2178 and I am now...
  4. C

    Running KOEO, KOER using a generic scantool (ELM327)

    Sorry for the late reply. Yep, I have tried everything and it doesn't work. I've tried all possible combinations and all I get is 7F. I'll post back later a transcript of the dialogue with the car. One curious thing that I saw was that the reply from the car changes in some cases if you...
  5. C

    Running KOEO, KOER using a generic scantool (ELM327)

    You can find this information in the Service Manual. The Service Manuals can be found here http://www.fordcds.com. They are kind of big but they do contain the information that you need. I copy&pasted just the information that you need in a PDF but i can't find any way to attach it to this...
  6. C

    DTC 0715 - Turbine Speed Sensor gone bad

    Thank you all for your answers. I have the pinouts since I took the time to download the manuals from fordcds.com. I do not know where the connectors are. I think I found the transmission connector under the hood near the firewall (at least it looks to be big enough). What happens if I...
  7. C

    DTC 0715 - Turbine Speed Sensor gone bad

    Could anyone tell me what problems can appear by driving with the TSS sensor gone bad? I have not had a chance to diagnose if the resistance is within specifications because I couldn't find the Transmission External Harness Connector. Even if it isn't within specs it is my understanding...
  8. C

    Running KOEO, KOER using a generic scantool (ELM327)

    I guess you are talking about the ford enhanced PID's because I can't acces the test that I wrote about. Ok, to access these PID's you can't use the scantool.net program. It doesn't have support for Ford PID's. As far as I know none of the programs that were wrote for the ELM interface support...
  9. C

    Running KOEO, KOER using a generic scantool (ELM327)

    Hi, Does anyone know how to enter KOEO, KOER and acces all Continuous Memory DTCs using ELM327? In the PC/ED manual it says to do the following: - for the KOEO test: Enter the following string to initiate KOEO Self-Test: Enter the four strings separately and in the order shown...
  10. C

    PATS light flashing code 113 or 23

    Hello, I have a 1997 Explorer 4.0 SOHC, European version, meaning it has a Bosch Immobiliser system (the one with one botton on the remote) and sometimes, after I start the engine the THEFT light on the dash flashes a code at me. There are a total of 5 flashes which could mean either 113, or...
  11. C

    Key fob remote entry working intermittently

    For european Explorers take a look at this thread to see how to disable the immobiliser. I don't know if it will disable it completely but it will disable for that driving cycle, so you will be able to drive away. http://www.explorerforum.com/forums/showthread.php?t=158976...
  12. C

    bosch immobiliser system

    Does the procedure disable the immobiliser permanently or is it just for that driving cycle? I have used the procedure from the new remote section up until you start the engine and it worked for me a couple of times but it doesn't disable the immobiliser permanently. From what I have seen...
  13. C

    Programming a new remote on the Bosch Immobiliser system on European Vehicles

    None of the dealers in my country were able to program a remote to my car. They were nonetheless able to sell that remote and when they realised that they had no idea on how to program it they said that the immobiliser system was faulty and needed to be replaced at ~2500 Euro. Here is what was...
  14. C

    bosch immobiliser system

    The way I see it you have the new version of the immobiliser. Might I ask why do you want to disable it? Any way here is the way to do it. But I think it is only on a temporary basis. I have not checked on my car since my two remotes now work like a charm :D. Set the ignition switch to...
  15. C

    bosch immobiliser system

    Programming a new remote on the Bosch Immobiliser After many searches I found out how to program a new remote. The main dealer in Romania told me that I had to replace the system in the car after they kept the car for two weeks and were unable to do it. It took me half a day to figure it out...
Back
Top