Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. E

    Which would you choose? SAS

    alright the one ill be grabing has the 7 leaf pack. originally was going to grab both axles off it but came to find out that it had a dana 20 in the rear. Plus like you said be a little easyer in a way to do a SAS on the x which is what im hoping
  2. E

    Which would you choose? SAS

    but there wont be as much flex with the leafs right?
  3. E

    Which would you choose? SAS

    For everyone that has done a SAS did you go with coils or the leafs? cause i have a chance to grab a whole front sub frame from a 85 wagoneer which has the leafs up front and has the dana 44 with 3.73 and can grab a ford 9" both for around $200
  4. E

    ABS bolts?

    what size are the ABS bolts holding the senser to the dust shield ?
  5. E

    33x12.5 tires/ a4ld trans.

    im running 33x 12.5 baja claws with slight rub on the radius arms but thats only turning tight . . thats with a 2in lift . as far as the a4ld yea its junk but also kinda depends on what your going to do tho
  6. E

    ranger tailgate on a 1st gen ex

    with the tailgates its going to be ither to long and to short . . already tryed to do this with my x. so instead went with a air net. still looks good
  7. E

    Monroe Sensa Trac

    looks fricken sweet . . that would look great in a 2 door version
  8. E

    Monroe Sensa Trac

    just installed them this morning and there great. . long as you dont mind a stiff ride. But when pulling with them its great.Pulled my 14 foot boat to and from the lake. It had to be probly the nicest ride ive ever had while pulling that thing behind my X. Pic of them are here if your wiling to...
  9. E

    Monroe Sensa Trac

    was woundering if anyone has Monroe Load Adjusting Shock Absorbers on there x and what they think of them
  10. E

    Dana 35 or Dana 28?

    would the tag on the back diff say anything with the gears ?
  11. E

    Dana 35 or Dana 28?

    Thank you ... and one more question with the gearing how can you tell what you got when the code on the door is missing?
  12. E

    Dana 35 or Dana 28?

    I was at the auto parts store yesterday looking for ball joints. they say there is 2 different front axels on the X. Dana 35 and a dana 28 how can you tell which one you got? ( considering that i dount have the origanal door codes on it)
  13. E

    94 F 250 springs?

    heres the link to the page. http://www.cardomain.com/ride/2570403/1
  14. E

    94 F 250 springs?

    actualy they work perty good, ill get some pics up tommarow after the aligment.
  15. E

    94 F 250 springs?

    to put them under the front coils
  16. E

    94 F 250 springs?

    alright ya'll talked me out of it. i ended up geting 6 of these 1/2 inch washers and some shakels from advanced auto parts in all total it costed $ 45 bucks and got about 2 1/4 out of the front and 2 3/4 out of the back
  17. E

    94 F 250 springs?

    I have been. about a year or so ago i got a 302 out of a 74 econo van with a c4 and transfer case. plus it will get soild axels, so thats kinda what ive been going at :confused: :D
  18. E

    94 F 250 springs?

    with droping in a 302 (sorry i didnt mention this before) also affect it in ways where the 250 springs would be better in a way? and also putting in the 150 coil "spacers" make the ride stiffer too.
  19. E

    94 F 250 springs?

    like what? besides the f150 coil seats or buying a lift kit.
  20. E

    94 F 250 springs?

    alright the i got the stock springs diameter: inside dia.= 3.61in, bar dia.=.672 free height=13.38in, spring rate=463lbs./in, Load=813lbs, load height=11.5in, end pig tail, end 2= square coil spring While the F 250 Inside dia.= 4, bar dia.= .812in, Free height=15.06in, Spring...
  21. E

    94 F 250 springs?

    what about 94 f150 coils? considering that the 250 of that year are the same measurements is it also possible they could work instead?
  22. E

    94 F 250 springs?

    To be honset i like the ruff ride, but flexing how would it affect it? is it just because of the crush rating or?
  23. E

    94 F 250 springs?

    Would F 250 springs work under thr front of the X. There the same size but the 250 springs are 2 ins longer then the x's and there crush rating is at 1200lbs instead of 600 lbs of the X
  24. E

    Explorer Truck

    Just finished the chop on my X let me know what you think? http://www.cardomain.com/ride/2570403
  25. E

    a/c unit to air compressor?

    sweet thanks, but with the hose running back did you put it through the frame
Back
Top