Search results | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Search results

  1. Stanleyjd

    Moab 2016

    Any one know where the ecm coolant temp sensor is on a 7.3 powerstroke?
  2. Stanleyjd

    Moab 2016

    Looking forward to seeing you all at moab even though i will not be in my ex, i will be coming with Gman, aka Greg
  3. Stanleyjd

    LOM fix with pics

    Thank you lunchboxx, your solder repair worked and fixed my sis's 96 limited light out module, driver side head light out issue
  4. Stanleyjd

    speedometer

    i have had the same issue, mine also is causing problems with the trans shifting while not working, its finally to the point of not working at all now. i have changed the sensor on my 96 4.0 on the t/c worked for a while then stopped again, it not the cluster, im thinking mine is a bad connector...
  5. Stanleyjd

    1st post tranny question

    yeah its really slow, im going to have to try to find it, thinking most likely a cracked radiator or bad coolant cap, gotta look, wont know till then. at the least he was told radiator, but he really hasnt had any really helpful help
  6. Stanleyjd

    Intermittant Coolant Leak

    sounds like you need a new cap, the fluid you see on the metal lines is a trans cooler lines. the fluid is most likely running down on to the cooler lines, i have a buddy with a 2007 v6 thats losing coolant, i havent had the chance to search for the leak yet, just browsing the forum to see whats...
  7. Stanleyjd

    1st post tranny question

    I have a friends 2007 4.0 sohc, dont know 5 or 6 gears. but its sluggish from drive to reverse when i tested it and slipped only once around 2nd he says it does it all the time couldnt believe it didnt do it more while i was driving it. i am trying to help him in research to possibly save it...
  8. Stanleyjd

    whats ben lee's handle on here? i need to order of those fancy serious explorations license...

    whats ben lee's handle on here? i need to order of those fancy serious explorations license plate bracket for another member that mailed me a radio. thanks glen
  9. Stanleyjd

    2013 All Ford Nationals @ Carlisle, Pa Jun 7-9

    I will try to make it but it all depends on work again :/
  10. Stanleyjd

    Engine v6 sohc for 2004 explorer

    need an engine that fits the 2004 explorer v6 sohc. helping a friend of a friend try to locate one. we are located in south eastern Virginia. thank you
  11. Stanleyjd

    False Battery Light???

    i defiantly know the nickle and dime feeling. its on going when miles and age get up there
  12. Stanleyjd

    3nd gen with 35 ?

    wow great work buddy! this is your million dollar idea. keep up the great work and never give up!
  13. Stanleyjd

    Central Virginia Meet and Greet

    i am deff down with corolla in the obx i have been a few times, its a blast
  14. Stanleyjd

    Central Virginia Meet and Greet

    im down if i can get everything straight on my truck by then
  15. Stanleyjd

    An EF tragedy... John Rock passed away

    Rest in peace John. My condolences to his family and friends.
  16. Stanleyjd

    2000 5.0 awd coolant leak

    whats up with your old motor? i got that stupid timing cover leak also. i live in vb. i got 2 x's so i am driving the 6 at the moment cuz the timing cover leak is too bad to drive now.
  17. Stanleyjd

    Advice on 5.0 Coolant leak - driver's side top

    i got the same problem and its like 900 bucks to fix :( duno what to do motors got 216k on it trannys got about 30k dont plan on getting rid of the truck.
  18. Stanleyjd

    Projectors/Clear Corners/Tails & HIDs

    thanks much appreciated. i am sure that write up will make it in the top postings for sure. since no manufacture has wanted to step up to the place and make a mass production model yet. but they make one for the ranger. why not the ever so popular explorer? i dont get it but whatever.
  19. Stanleyjd

    Projector Headlight Assembly Pricing

    looks like he does and i have seen those on ebay for the 99's and up just not for mine
  20. Stanleyjd

    Projectors/Clear Corners/Tails & HIDs

    i would like a pair but not for that price no way i could afford to pay that. but if you would be nice enough to say how you made them for the people that are interested in making them that would be much appreciated. i am sure some one with more money than me and that isnt interested in making...
  21. Stanleyjd

    Projector Headlight Assembly Pricing

    where did you get those? i have been looking and havent found any yet
  22. Stanleyjd

    Granatelli MAF CODE due to cold AIR

    so your recommendation is go back to the stock one? how would i go about locating someone locally in my area to have it calibrated?
  23. Stanleyjd

    Granatelli MAF CODE due to cold AIR

    stock MAF is fine i wanted an upgrade for obvious reasons. only afertmarket MAF seem to have a problem with turbulence. i have had to go back to stock for the mean time. yes there is a a separate sensor for the temp. i have an idea of putting hte stock screen that comes with the stock MAF but...
  24. Stanleyjd

    Granatelli MAF CODE due to cold AIR

    Granatelli MAF CODE due to cold AIR INTAKE I called Granatelli today and they said they no longer reflash/ reprogram their own MAF sensors. that is crap i keep getting a code due to my cold air intake. it works fine with the stock intake. any suggestions for getting this problem fixed. they...
  25. Stanleyjd

    97 Ext explorer with a blend door problem?

    i got the same problem. i got ac but no heat. i have ordered a new blend door i will be waiting its arrival to start this task. i gotta get the heat back
  26. Stanleyjd

    Heat not working

    ok so i just replaced the thermostat and the problem is the same. what else can it be?
  27. Stanleyjd

    Heat not working

    ok i went to my neighbors house that used to work at the ford dealership and he looked at it. he said the heater core seems to be working cuz he felt something hot. he checked the blend door and flipped it back and forth between hot and cold he said he could hear the blend door switching. he...
  28. Stanleyjd

    Heat not working

    yeah umm i dont have a brake vac pump but i know some one who does if i cant get their help i will buy one he said it was only 30 bucks when i was bleeding my brakes... thats cheaper than a shop and not like i wont use it again thanks
  29. Stanleyjd

    Heat not working

    ok i know its not a broken knob cuz its electronic. i also know that the heat went out slowly. i checked the lines running to the heater core and both are hot.
  30. Stanleyjd

    Heat not working

    how do i go about trouble shooting why my heat doesnt work? its a 97 exp v8 with a lot of miles 197k to be exact thanks
  31. Stanleyjd

    97 v8 tranny swap to 01 HELP

    ok i bleed the brakes again they are a lot better amost 100% now i think its either the front brakes need to break in or a little more bleeding thanks
  32. Stanleyjd

    97 v8 tranny swap to 01 HELP

    i dont think it was ever leaking in the cabin. he would have mentioned that. he also gets information mixed up. i do know for fact that the heat slowly went out. it could be played with for a while and get to work till one day it wouldnt know at all. i think everything is still connected. and...
  33. Stanleyjd

    97 v8 tranny swap to 01 HELP

    i got more barke fluid but havent had anyone to help me with it so will have to wait on the brakes. the heat doesnt work either. my friend that owned the truck b4 me said one of his friends dads tested it and he said that he disconnected one of the line to the heater core and the fluid was...
  34. Stanleyjd

    97 v8 tranny swap to 01 HELP

    the surface of the rotors is shiny. another guy locally said that it may be air in the abs and to bleed it. he also said they may be water in the lines or something cuz it sat for almost a year. the master cylinder was being filled before it was ever empty so i hope there isnt any air in the...
  35. Stanleyjd

    97 v8 tranny swap to 01 HELP

    new fluid was put through as old fluid went out they were bleed till its wasnt dirty any more. i talked to my neighbor that worked at the ford dealership he said basicly what you are saying rebleed the brakes then i could also scuff up the rotors a little bit with some fine grit sand paper 300...
  36. Stanleyjd

    97 v8 tranny swap to 01 HELP

    ok changed the brake fluid and front pads bleed the brakes still the same. i have pressure on the brake when i pump it when the trucks off so i think the master cylinder is good. how do i go about trouble shooting the brake booster and its hoses?
  37. Stanleyjd

    97 v8 tranny swap to 01 HELP

    works like a charm now thanks. now i gotta fix the brakes they are really soft any suggestions?
  38. Stanleyjd

    97 v8 tranny swap to 01 HELP

    ok you cant use the connector off the 97 cuz it doenst have the right holes they switched it a little bit the 97 has the hole filled in thats how it got switched . i am going to copy down the location of wires on the 01 then remove them then put the 97 wires in the 01 connector i am so stoked
  39. Stanleyjd

    97 v8 tranny swap to 01 HELP

    i just pulled it and looked the diagram it was backwards it needs to be more clear what the front of the plug the back i compared it to the 01 harness thats how i know now will let you know how it it once i get it switched YES! :)
  40. Stanleyjd

    97 v8 tranny swap to 01 HELP

    ok gave it a good tug and it came out cut my hand in the process but thats minor :) thanks will keep you up to date on the progress
Back
Top