Search results

Check all fuses Try disconnecting the battery and take a voltage reading If it’s putting out 15v then it could have overcharged and blew some things which would explain why a 12 v system is not happy with 15v FYI I’ve never seen a 12v battery hold More then 12.5 volts When running it should...

This is why I have several complete trucks out back… personal parts donors I’m buying more all the time Getting very difficult to find old bronco iis in the yard

Watch videos on how to do it there are two ways either plug off both ports or run hoses from each port into the reservoir

It is very odd indeed Many many 4406 trucks running around here for years and never an issue You still running a factory runner trans mount @vroomzoomboom ? We shall know more shortly be there in hours

Yin can bench bleed the master with it connected and use the pedal to Build the pressure… just don’t push too hard you don’t want to bottom out the seals before the master is bench bled

Have you tried driving without front shaft? See if noise is there First thing I do with a noise like this is make sure it is in the rolling drivetrain and not the engine. So the noise will either follow the speed of the tires/drivelines or engine Metal on metal scratching noise like this...

I’ve had good luck and many many miles on the good ol conversion joint. Get the lifetime series (white seals) or better and they won’t need a grease zerk Autozone has been able to get me spicer u joints or the local carquest

Vroooooom vroooom is the plan Head on over to Eddies house Tuesday eve for beer fest I’ll be under a truck I’m sure Parts gathered truck packed oil changed Just happened to have a complete 5.0 drivetrain in the back of my truck, perfect parts donor

Only pics I have I can get more she’s parked outside 05 trac 5.0 4r70w 4406m, 5.5 superlift from a ranger, custom exhaust, fuel system and instrument cluster

Very hard to tell over video phone but I think there is a crack in the tailhousing as well Eddie has been doing a fantastic job on his end. Once I saw the leak (fountain) I knew it was not a gasket failure so we went hunting and I spotted the sheered bolts The th does look cracked around one...

Well done! Now you need idler for yellow trac

That’s what Brett said He said “I do Baja every year and I’ve seen some carnage, but I have never seen anything like this” Leave it up to me to break new ground!

I like it! Hopefully that switch holds up being mounted there <———- new leaf no clutter or chit chat

Heading to Seattle Tommorrow with a new tailhousing gaskets hardware and tools Three of the tailhousing Bolts sheeted their heads?? Must have been a pretty violent jolt when the front d shaft cardan joint yoke broke. We were able to determine the leak spot via video chats Let’s hope the...

Here is the blue 05 we v8 and lifted with used ranger superlift I had to wire it backwards at the instrument cluster to think it’s a 02 Also had to bypass the fuel pressure sensor 05 is a different monster We lost a tire on the test drive he didn’t torque the lugs that was fun Only pics I...

33” tires yes I have pics let’s me post them

2” body lift for sure helps things fit, especially tires and big engines! For me it was for tire clearance and also so I could run the side exit exhaust

He’s just trying to fix the cel first but jumping around also trying to find the source of the code and the issue the engine is having Fuse 2.11 is fuse 11 in the cjb Central junction box is central or the one in the dash The power junction box of pjb is the one under the hood. The cjb is...

Lucky!!!

Ah yes This dude. Yes that does make it more tricky I believe in the past I was able to pass speaker wires through this, if not I’ll go next to it, through it under it w zip ties

That max track kit I think is for rwd rangers only (even torsion spring yes) The superlift is not available You may need to find a 6” rough country suspension system for 2000-2011 ranger 4wd it will fit your sport trax and accommodate the 02 brake rotors The rear shocks may or may not work...

No floor hammering needed Just modify the fuel tank bracket We use a bfh and a concrete curb Take bracket out of truck Hammer snot out of it Re install I think I used a grinder on the most recent one to clearance it. I cannot remember I know back in the day in my “410fortune goes low range...

I put heat, signals, and cameras in the side mirrors of a 2007 ranger recently I ran the group of new wires with the dash all apart door panels out and door wiring boots disconnected… on that truck I used coat hanger and once I had one wire through I used it to pull the others The explorer...

Energy suspension body mount kit for 02 sport trac 2” My body lift came from a truck I crushed I believe it was originally designed for a ranger. 4 door ranger is very similar to sport trac as far as the body lift goes… 6 pucks under the cab 6 under the bed worst case can get longer bolts in...

Way different at the base Before I ever even attempted this I studied other fords for a solution Gen iii no work People said the next sport trax mirror would work, (07+) wrong same mirror as f150 base not even close to same size or shape Ranger and Mazda b series doors shaped way differently...

Both sides done I made a how to thread for everyone Enjoy! Blamo! One Of a kind! At least for a minute hahaha https://www.explorerforum.com/forums/threads/410customs-square-mirror-mod.507654/

Thank you Should work on 91-94 explorer and 93-97 ranger. Just have to use the same principal to modify the existing truck side base

Improved vision on each side and updated styling. Next I will be adding the muth mirror systems glass with heaters and led turn signals

Now that the truck side Mirror base has been modified to fit the ranger glass we will need one more bit from the ranger Mirror. We are going to create a cosmetic cover that will snap in place and cover the gap created on our modded base. Lucky for us the ranger mirror is about 1/2 thicker so...

Now we need to separate the ranger Mirror from its base See the gold spring and plastic peg? If you line up the mirror in its home position (the folding portion of the mirror) and you twist that peg the mirror halves release Like this Have a firm grip the spring is loaded Congrats...

I present to you the square mirror modification for 95-01 Explorer, Mountaineer, 02-04 Sport and Sport Trac (and more). Let’s face it, the old tiny round side Mirrors are outdated! The 06-11 Ranger side mirrors are far superior in styling and vision. After many many years of having explorer...

There are basically two or three of these modules as far as I can tell The Motorola 4x4cm came in three flavors Control trac awd (like your 02) Non control trac (rangers, sport tracs, 02-05) I’ve swapped them out many times with a similar one from A similar vehicle never checking part...

Ford had two or theee different pcv hose routings on these intakes it just depends on which intake you have. There are at least 3 different lower intake and upper intake setups on the 96-01 5.0 most of the changes happening 96-98 The pcv is usually connected to two of the larger ports on the...

Well 99 and 2000 are basically the same truck So the body will swap without too much issue, if any It should basically be plug and play However you will want to keep your v6 dash and wiring as the v8 maybe missing a few things like a different gem module and 4wd controls and wiring It...

Did you do a sweep test on these tps sensors? They can be tested rather easily.. not often so they fail but I have had several with a “dead spot” half way through the sweep test

So the check engine light wire should have battery power + when the key is turned to on and until the engine starts. Then since you have a code it should remain hot until you turn the truck off, the power should go away if you clear the code and before it comeback Basically if you have battery...

Check this out for your cam Sensor code https://www.explorerforum.com/forums/threads/reman-4-0-sohc-problem-with-p0340-error-and-42-stft-error-solved-finally.494133/

My favorite mod thus far

Pm sent

Here is a good thread about testing fuel level ohm on a similar 04 ranger https://www.ranger-forums.com/general-technical-electrical-18/help-gas-gauge-04-xlt-4-0-4x4-149170/