Search results

ok, thanks for the suggestion. i will mention it to my son. mike

front whl bearings thanks so much for the information. however, there is one thing i have read several times and still don't understand. several people in responding to my problem have said how to tighten the "inner" spindle nut! my 93 exp sport w/ auto 4x4 appears to only have an outter...

bearings i did not use a "new" nut after installing new bearings. that may be a good idea. like i said i had it aligned the other day after re tightining the bearings and checked them yesterday before my son went back to college. they were still fine, with no play. thanks for the suggestion...

bearings thanks for the help. i retightened the bearings last night and it took out the play. i took it back down to goodyear for the alignment and it was ok. thanks again for responding.

bearings thanks again. i will think about the solid axle option. the more i think about it, it could be that iu never got the spindle nut tight enough to begin with, worrying about getting them to tight and burning them. i really appreciate the help!! mike

front bearings thanks guys for the help. i just got back form goodyear trying to have it aligned. they said that i may not have the spindle nuts tight enough after installing new bearings with new greese and everything. i tried to not get them too tight as to not burn them up. i am going to...

3RD set of front wheel bearings in about 2 years! has anyone had this problem? could it be the hub assembly where the bearings ride? could it be something else futher in? help!!! mike

bearings great info. i appreciate it. i will take your advice on tightning the nut finger tight while shaking the rotor. thanks again, mike

bearings thanks for the advice. we will ck them more often. question: with the key in the lock nut, how can it come loose? thanks again

third set of front wheel bearings we've replaced in 2 years. has anyone else had a similar problem? 93 explorer w/3" body lift and 5 1/2 susp lift.

Chad and Marty, thanks very much for the tips. we started this weekend and should be finished shortly. getting it out was one thing, i don't know about getting it back up there!! well, we will use your suggestions and just do the best we can. thanks again, mike prov.3:5-6

my son and i are going to install a new clutch in his 93 sport this weekend. any suggestions or helpful hints for the job? for instance: disconnect the transfer case or take it all out in one piece? thanks for your help, sudiew

Thanks for your response and tips on the clutch master cylinder problem ANIME4x4! We will probably tackle the job this weekend and I'll update you on the progress. Thanks again! Sudiew Prov. 3:5-6

Thanks for your suggestions on the clutch master cylinder replacement. I hope to get to it this coming weekend. Thanks again! Sudiew Prov. 3:5-6

it looks like we've got to replace the clutch master cylinder on my sons 93' explorer sport. it appears to be bleeding past the seals in the cylinder and not holding the pressure. has anyone done this before? and can you offer any helping hints? thanks, sudiew prov. 3:5-6

lifter job great job with the instructions and the pictures!! we just had to do the same thing on my sons 93 explorer. i stopped by the ford garage first. the guys were very helpful. just a note on the right bank exhaust. you can take it loose at the connection down below the headers where...

My son and I are having problems with his clutch. Every couple of weeks we need to bleed the hydraulic clutch on the side of his transmission. If we don't, the clutch seems to engage way to soon, just off the floorboard. Thanks for any suggestions anyone may have. until, Sudiew

3" lift thanks for the help. it sounds like the duff's 2.5" is the way to go. i appreciate the info.

my son and i have done a 3" body lift on his 93 explorer sport. of course he wants it higher now! and thats ok. its a great bonding time doing the work. please advise us as to the best 3" lift kit our there for your money. and also if there is any suggestions or hints we would welcome them...

my son and i just installed an 3" lift on his 93 exp sport. everything went fine, however, now the shifter hits the center console in 2nd and 4th gears. any suggestions? thanks!