Search results

NVH concerns Generally speaking you could run into a noise vibration or harshness concern if you don't replace them. Take a look in a junk yard or simular vehicle.

engine information request How much static compression is the engine running? What is your base timing and what type of timing curve do you running based on your boost? Is there a intercooler on the vehicle? If so how much more timing and boost do run with that modification? Does the vehicle...

abs false activation Concern: abs false activation at low speeds while deceleration with the brake pedal depressed. Situation: there is three channel system on this vehicle. two front wheel speed sensors and one rear wheel speed sensor. The wheel speed sensors for the vehicle are a/c...

The only set of headers I have seen for the 5.0 L Explorer is the SVO Motor Sport headers. Other wise you will have to have them custom made. I think that they add about 20 horse power.

Dyno Explorer I would like to see them dyno a AWD by removing a fuse. I know the Borg Warner Resident Engineer which is the manufacture of that T-case and I have never seen a fuse to remove on the vehicle to disable the 4X4 system. *I could be wrong* My understanding of the viscous...

snow plow If its an explorer that you are installing a snow plow on. I can't recommend that you do such a thing. Neither does the manufacture of that vehicle.

Sleeper Not even close.......... My truck looks stock. The only thing that you might notice is the red EB shocks in the rear of the vehicle. I think that troll has a little more custom work done to his ride. That being a little more horse power. However since I can't measure the HP on a...

No pictures yet No, I don't have any pictures yet to show will have some at a later date though.s

Modifications done to Explorer I have a 97 ford Explorer with a 347 stroker, super charger 5 psi. isky cam shaft, headers (SVO), duel exhaust, 1.71 roller rockers, EB victor heads (ported) 2.08 intake valve with 1.625 exhaust. nitro 80 horse dry kit shot. modified air intake box. Flow master...

Plans to run my explorer at the drag strip are in the works...... But for now I leave it looking bone stock on the outside...... SLEEPER...... for mustangs and other such would be pray. You will go home and eat your gun when a bone stock looking explorer beats your mustang or camero. *laugh*

Ratings The stock V8 Explorer in accordance with SAE J1349 advertised peaks: 288 lb-ft @ 3300 RPM, 215 HP @ 4200 RPM Your 4.0 L SOHC peaks 240 lb-ft @ 3250 RPM, 210 HP @ 5250 RPM in accordance with SAE J1349

Ratings The stock V8 Explorer in accordance with SAE J1349 advertised peaks: 288 lb-ft @ 3300 RPM, 215 HP @ 4200 RPM Your 4.0 L SOHC peaks 240 lb-ft @ 3250 RPM, 210 HP @ 5250 RPM in accordance with SAE J1349

Wanna Race!! I will race you with my Super Charged 97 EB 5.0 AWD Explorer. Have to test and tune first......... Power Train 1. 347 c.i. 2. 80 shot dry nitros kit 3. EB Victor Junior's Fully Ported intake valve 2.08 Ex. 1.625 4. 1.71 Full Roller Rockers 5. Super charger 5 psi...

Wanna Race!! I will race you with my Super Charged 97 EB 5.0 AWD Explorer. Have to test and tune first......... Power Train 1. 347 c.i. 2. 80 shot dry nitros kit 3. EB Victor Junior's Fully Ported intake valve 2.08 Ex. 1.625 4. 1.71 Full Roller Rockers 5. Super charger 5 psi...

Exhaust Modifications I have a pretty extensively modified explorer and find that putting a 2 1/2" cat back with a flow master muffler system has more than given me a power increase and milage increase. Present modification include Roots blower 5 psi. of boost, Nitros (80 horse dry kit)...

Exhaust on 5.0L I have a 97 E.B. AWD 5.0L with 2.5" exhaust from the cat back. It will sound like a mustang basicly when you get rid of the sotck muffler and the resonator. I get a exhaust drone at 2200 RPM which is about 55 mph cruise speed on the freeway. The Power difference in the...

Re: Congratulations!!!!!! I see that you have a Eaton blower on your vehicle. That has a magnason kit on it. I have the same kit on my 97 Explorer EB AWD 5.0L I have the following modifications presently done; SVO motor sport headers, 2.5" exhaust from the cat back with flowmaster muffler...

Re: Congratulations!!!!!! I see that you have a Eaton blower on your vehicle. That has a magnason kit on it. I have the same kit on my 97 Explorer EB AWD 5.0L I have the following modifications presently done; SVO motor sport headers, 2.5" exhaust from the cat back with flowmaster muffler...