Search results

BFgoodrich makes 31x10.5x15 32x10.5x15 33x10.5x15 http://www.tirerack.com/tires/Compare1.jsp?startIndex=0&width=33X&ratio=10.5&diameter=15&search=true&pagelen=20&pagenum=1&pagemark=1&x=8&y=10

All of that stuff is junk. Go with a good shock and good tires. It all depends on what ride you want and if you are going to haul anything.

I would second the heater control valve. Just did mine at 97,000. Took 5 minutes. Autozone 14.99. Whoops, didn't see the response on plug. Yeah check for compression and run a leak down test.

I never post because of the search, but I can't find the answer. I have home made shackles and my drivers rear spring saggs 1/2" compared to passenger side. Could I use the extra holes in my drivers side shackle to compensate for the sag? If I do what are my saftey concerns? Thanks Guys Chris

Yes, This is now my only option. thanks Chris

I never post anything but man that thing looks GREEEATE . I was going to do mine like that but couldn't find the correct matching paint. emerald jewel green or some kinda crud like that . But it really makes a difference.

Don't sand the paint. What you do is put light coats on until you get the desired color. Then apply a heavier coat just enough to make the paint look slick. Let it dry . Then it will be glossy.

Sorry about the late post. I did this with my X and With my beamer for the euro tails. Get some "testors" modeling spray paint, WalMart 3.59, Clean tails mask & paint. Oh, Just paint the orange part not all the tails. The color I used was candy apple red clear. Just 2 to 3 light coats and...

Hey, What I did was to go to your local auto parts store and get some non-skid tape. Black works best and just apply it from front to rear over the holes. Everyone that has seen it, thinks it was a great idea. It was only $18 bucks . Chris

http://www-odi.nhtsa.dot.gov/cars/problems/tsb/results.cfm Here is the link. It is the 4th one down listed as steering.

I believe there was a mention of this in a service bulletin to fords mechanics . Don't remember where I saw it though, but was not a recall

Well sorry for the mis information. I guess I'll go ahead and throw in a relay for good measure on mine.

Hey, Its no problem to do it. I did mine today, sorry no pics. All you have to do is cut the wires at the stock fog lights and splice in your new wires that go to the aftermarket fog lights. Remember you can only wire 2 lights to the stock system. If you need to add more lights you need...

Doing everything myself. I called warrior and they told me that the shackle on the 97 only gave me a 1 1/4 lift. The AAL should give me 2" so I'll only be 2" in front and 3 1/4" in rear I don't believe that 1 1/4" will be that big of a deal . Plus sometimes I pull a trailer or load down the...

Red Top , worked at auto zone part time never had any complaints from customers. They ran 125.00 down here it is a great battery and on my list

Jake, not really trying to get a large tire right now . Maybe 32x10.5x15 So I can keep my stock rims. I will also be getting PA BL, just wanted to get all of my info on this before I get started. I work in Baton Rouge , never been wheeling before but looking to start. Thanks for the...

The reason I ask is I believe my suspension has settled and want to get max height w/o problems So, if I am at 32.5 and do a 2 inch TT then I would be at 34.5 But if I were supposed to be at 34.0 And did a 2 inch TT . My new height would be at 36.0 without binding. Therefore...

Hi Everyone, I'm new to the site and are ready to start modding my x The first thing I want to do is TT/AAL/Shackles But my measurements from the ground to the fender lips all the way aroud are 32.5 inches . this sounds a little low from what I have read here. By the way 97 x 4x4 w/ B...